Viewing all customer Discussions for:

39-156 Caradco Window Crank, 9-1/2"

Caradco 20755 is the number on the left windoe but I need the right windo replaced

Good day, I have a bay window with a casement windows on either side, the right hand windows casement crank operator is a truth 40372 and is no longer operational, would like to know what part number I need, also this same window has a 10" track on the top of the window frame that holds the casement ... (cont.)

Do you have this part?

THERE ARE 4EA WINDOWS, ALL OUTSWING, 2 EA LH, 2 EA RH. THEY ARE ABOUT 25 OR SO YEARS OLD,TRUST MECHANISM. OTHER THAN THE 20755 ON ONE ARM I DON'T SEE ANY OTHER MARKS. YOUR HELP IS APPRECIATED.

I purchased the Entrygard Dual arm operators 39-155 and 39-156 . On the original arm there was a stamp 20755. These work great. thank you. Now I need the top arm. ? bar hinge?? can you tell what parts I need to order? is it the 36-004-10?

Brand Truth, Part number 40-372 We are looking for a replacement

Ihave multiple casement windows circa 1983 with 2x4 walls. Many of the mechanisms are loose and need replacement. The other thing I don't like are the old style crank handles that are used on these windows, they stick out quite a bit and interfere (to some extent with shades. Are there any version ... (cont.)

Can you please help me get a replacement part? Thanks

Our Crank on the Milgard Windows opens the windows slightly and then just spins without further opening or closing the windows. What is the part number I need to replace?

30842 Truth Entry Gard R

Entry Gard TRUTH, # 20755 on top of the long arm, TRUTH with # 40754 on the bottom of the long arm. # 31538 on the bottom of the curved arm. This is a left-hand opening. Thank you!

Looking for replacement cranks I believe it is an Andersen window

Thank you for reviewing this. Please get back to me so parts can be ordered or more information can be given to you.

I need new arms. I can see on the current arms. Entry Gard. top looks like 755. bottom of arm look like. 30242R??? I think I need part numbers: 39-031 and 032, 39-107 and 39-205 Can you confirm please before I order. Thank you

It's a Milgard window from about 1998.The crank has Truth stamped on it.Can you please give me the replacement part number?Feel free to call me if you need more info. Thank you Chad

This is a circa year 2000 Windowmaster purchased from Home Depot and installed by my contractor. Looking from the inside, the crank is on the left and the window pivots out opening on the right. The part reads Entrygard and on the bottom there is a code 40754

I haven't removed them yet as I'm afraid to without having a part to replace them. This one says Lincoln and it's 4.5" wide at the narrowest and maybe 5" wide at the widest. Not sure as I didn't take it off the window. Also says "made in the USA."

Need a replacement window crank. Caradco part Gear is stripped. Crank is on right side of window Opens from left side to right. Will probably need to replace more .

Good morning, I'm looking for the following replacement parts for my existing Semco casement windows (vintage approximately 2002):1 - operator mechanism, see attached 3 pictures showing arm lengths and orientation 1- handle for mechanism (bronze)2 - operator covers (bronze)1 - latch (right hand side ... (cont.)

30472 RH us the number on the big arm on little arm two numbers for the 2 parts of it 2810 and R30842 the base has number 40572