Viewing all customer Discussions for:

39-206 Andersen Awning Operator Kit

The clips included with the suggested replacement that attach to the window itself are completely different. They do not have a flat base and cannot attach to the window in the same way as the original. The original window attachment is on the top of the attached photo, the replacement, (the shiny ... (cont.)

Trying to find replacement parts for scissors style window crank

These are the only parts I have the window is 28 inches wide. It is an Andersen window I guess I would need all parts to operate window maybe we can retrofit

Need to replace 5 of these, having difficulty locating- can find cranks but I suspect the hex head is a part of the unit it goes into. The window cranks don't operate because they are stripped, again, suspect it is striped in the unit not the crank itself.

I am looking on your website and have come up with product 39-206. However my current crank operator is a little different meaning, the back metal piece is much longer and flat. I wanted to know if you suggest another alternative to the 39-206? Please let me know if you need anymore informatio ... (cont.)

I have an Andersen window from 1961. The roto lock system is about 34 3/8

I am renovating an old house. In the kitchen there are two Andersen awning windows with slid-lever mechanisms. The lower operator has a broken plastic disc so the slide slips and cannot move the window anymore. I bet it is only a matter of time before the upper on follows suit. I am concerned that n ... (cont.)

Hello, Have Andersen awning windows throughout the house with the Amerock/Lever Roto-Lock design hardware and Flexivent windows...from 1968-1972. They are currently the swing/pivot style handles, not rotating crank. Seems a lot of pressure must be put on the handles, unit and gears to swing the ... (cont.)

Do you have a replacement for this old Andersen operator?

I am looking for a double armed window system the plate Is 41/2 by 21/4 arms are 17in I have several windows that seem to be stripped inside the plate. Can you help me with what to order ? Thank-you,Dana Thomas

Hey there home owner sent these to me. I cant seem to find them anywhere. Do you have an idea which they are?

Casement window operator is stripped so the window wont open or close completely. Operator does not come off, even with the screws removed.

I have not been able to find the replacement for my Anderson Window Operator. The operator is stamped 7191-2. Any links to this part would be very helpful! Thank you, Seth

Hi, We have a window operator that needs replacing - the gears are striped. It is for an Anderson window - probably around 1980 It opens from the bottom and has hinge arms along the left and right side. Any idea whether you have a part that would replace this? it doesn't need to be an exa ... (cont.)

Will this Anderesen Awning Operating Kit replace my existing broken one. The pivot arms are stamped F 7184A 11. The round bar attached to the window measures 6 15/16" long. This is a 24" high by 20" wide awning window.

As a homeowner who knows the basics, is this replacement part easy to install ? I think it needs replacement because the handle does not open smoothly and I have to fight with it to open the window even partially. 39-286 is the handle I have

My house had Anderson Casement Window Dual Arm Model # 7198-17 installed 33 years ago. The only dual arm that I have located is for Awnings, what is the recommended model for replacement ? The arms are 7 1/4, 3 1/4 and 12 5/8" Respectfully, Abe