Viewing all customer Discussions for:

39-206 Andersen Awning Operator Kit

Hello, We are trying to find the correct replacement for this window crank mechanism. There are four screw holes in the metal plate part, the horizontal distance between the screws is 3 and 7/8 inches. The long arm is somewhere around 7 and 1/2 inches and the shorter arm is in the 3-4 inch range. I ... (cont.)

Hello, I was hoping to get some help with this hardware. I actually just need the clips that would go into the track. I attached one image of some hardware that has the clips. If I could just get those clips, great. Otherwise, I would need the new hardware.

Andersen Awning from approximately 1972. Need operator.

Looking for a replacement

I have a stripped crank. #60P719117. It is discontinued. Can you give me a replacement part option? I'm sending 2 photos.

Hi - I need to replace the operator on my bathroom window. Looking at your comprehensive site and threads, it looks like I have a blend of 39-146 and 147 combining two split arms and two cranks in the same operator? Apologies in advance, I'm sure this might have been covered in some thread but afte ... (cont.)

I am looking for this operator. I did not see it on your site and I cannot find a model number. Is there any chance that you could help?

I need two of these crank out assemblies for my 24 inch windows

What replaces this unit?

7191-2 is on unit

Awning hardware missing an arm need replacement part

Hello, I have a house built in 1960. Most of the windows don't open. They are wood double awning windows over/under style. The crank is centered on the bottom of the window. Some of the handles are broken and or missing and some of the crank arms are striped. There is no markings, names, or mod ... (cont.)

I have two broken window operators. They have two different numbers stamped on them, but they look the same and they operate identically sized windows. One of the stamped numbers is 7198-17 and the other is 7191-2.

Looking for part to repale anderson casement. Gear just comes out when I turn it.

Looking for a match or something that will work in this application

# 7191.2 Dual Arm Crank, 19-3/8"

I need to replace an operator on an small Andersen awning window, age unknown. Attached are some photos of the unit. The arms appear to be 11" or so long. I'm also not sure how to remove the existing operator unless I remove some of the wood that runs over the top of it. Can you provide any guidance ... (cont.)

The measurements of the glass 19" w x 19 3/4 T the window is about 36 years old. On the back of the part it says 17 7198-17 The cross bar that attaches to the window is 13" long and the holes are 10" on center. I don't see any other numbers / information except "Anderson window " ... (cont.)

Need the crank and whole component for Anderson window. Arms measure approx 9 inches out, then 3 3/4 inch arms and the one 13 inch arm that connects the arms.

I need help identifying this window crank.