Viewing all customer Discussions for:

39-264 Andersen Split Arm Crank

The window this is from is in another town so I do not have installed pics. F-9400-8A stamped on underside of main assembly There is a C on the extension arm and 1361484

Need this crank assembly right side crank

ANDERSEN LEFT HANDED SPLIT ARM CONCEALED CASEMENT OPERATOR (C-9400-1) marked on top center. D 361399 - on the split arm. F-9400-8 underneath on bottom center C-9400-1 underneath bottom leftSplit arm 4 5/16" stainless steel portion 3 5/8" first piece of arm gray in colorEntire arm is 7 1/4" in l ... (cont.)

This item seems to be what I need an the measurements r on target , what I dont see is a right or left hand controller ?? I need both r & l sides !! Can this item (39-264) serve both right & left sides ? I see nothing even on this 1 as to what side it replaces ?? Am I not seeing all the information ... (cont.)

I am trying to replace this crank hardware they are vinyl clade anderson windows the house was build in 1975 look like original windows there is a stamp onthe top c-9400-1 a stamp on the back f-9400-8 Bif that makes any sense

My Bay window crank needs replaced; it is Anderson part C-9400-1. I called and you requested pictures to get the correct parts

We are looking for an Andersen EZ Split Arm Operator / mechanism for an Andersen window. The # on the front is C-9400-1 and the number on the back is F-9400-8. The distance between the (2) furthest holes is 4.5". I saw a recent post asking the identical question, but looking at the 39-264 operator a ... (cont.)

Hi there, I am looking for a match part for my window closing mechanism assembly. I would like to get the whole thing and replace it since the small gear inside is completely worn out. The part number on it it is faded but my best guess is (part number : 9970A-3A). Please advise me that wich one of ... (cont.)

We would like help identifying the parts we need for our windows. Please see attached photos of window type and mechanisms. We were told by anderson that we needed the following: Qty (2) Universal split arm operators 2000 vintage casement windows Qty (1) Stone Bezel Please note that the windows ... (cont.)

Please provide your part to replace this original Anderson window mechanismFront stamp c-9400-1 and back F-9400-8Thank you Elliot

We are looking for an Andersen EZ Split Arm Operator / mechanism for an Andersen window. The # on the front is C-9400-1A and the number on the back is F-9400-8. The distance between the (2) furthest holes is 4.5". Can you lead us in the right direction for the correct replacement part? Respectfully, ... (cont.)

The crank operator opens an Andersen window with its hinges on the right side. The operator has a folding handle and is off center. The arm that is attached is two sections. The first is smaller...about 2 inch to the hinge. The last section is about 6 plus inches and has the slide clip at the e ... (cont.)

Good Morning, would you please help me identify this part so I can order? It is for the left side ( looking at the window from the outside.) The handle and cover are ok, but the window will not "roll out" any more. Thank you

The number (pictured) on the bottom of the mechanism is F-9400-08A with a B on the line below it.

I am trying to learn the name of this part. Written on the back is "F-9400-8A" and the letter "B". If the part is identified, I would like to order 2. I

Need 2 operators left and right hand operator stamped with c-9400-4. Would I need the adapters as well? Casements were made in 1995.any help would be appreciated.

The attached photo shows the Andersen operator that I have. I don't see a replacement that has the same screw hole spacing as mine so I'm wondering if the 39-264 is intended to replace this and I will just drill new holes to accomodate it. What do you advise?

Looking for two left and two right similar to this

I've been working on this a while now. The window glass, as you can see, says the windows are Andersen. However, the operators and the hinges don't match any Andersen parts at all. I even worked with an Andersen associate who saw photos of the operator and confirmed they have nothing like it. Th ... (cont.)

Need 2 replacements cranks but not sure what type to order- please advise! Thank you!