Viewing all customer Discussions for:

39-505 11-3/8" EntryGard Track, 4 Hole

The other casement anderson windows in the house are from 95-98. This particular part has no numbers at all. There is a round hole at the bottom of the crank that the arm went into and the round piece of steel is now sheared off. the arm can no longer be attached to the crank.

my number on the crank looks like 234 31 the best I can tell or it could be this number in reverse if you have one that would work please advise

I have a large casement windows that need to be repaired. the cranks needs to be replaced (left and right) as well as the left track. The serial number is 07701-00 R/H (this is the unit I need the track for. I also need to replace the track for that crank. Both cranks are missing the wheel th ... (cont.)

Operator arm is 10 1/4" long. What replacement operator parts will work in place of this old broken one?

As you can see from one of the photos threaded crank shaft where the window crank handle is supposed to fit onto it, is completely missing. I would really like to replace that threaded part, but if that is not possible then I would like to replace the existing operator. Also this one has a square pl ... (cont.)

I am looking for a casement window opening units for a window made by a company called ROW which discontinued making these windows back in the ’80’s. Attached are some pictures of the unit. Need some help. All of the windows in this house are 24” wide and the control hinge is 12” from the bend ... (cont.)

I need to replace 2 Andersen Straight Arm Operators(RH & LH)The arms measures 7-3/8" from the side of the operator base to the end of the arm.The arms measure 9-3/8" from the fulcrum to the end of the arm.The arms measure 10-1/2" from the center of the crank mechanism to the end of the arm.The b ... (cont.)

My window has the 9-1/2 Window Crank. The arm often slips out of the track which I then manually pop back in. Any recommendatations on how to fix this? Much appreciated. Sue

I saw on the net someone inquiring about biltbest parts. Do h u have access to the crank I've attached? It's a narrowish longish casement window that locks on the left ( as your standing) and cranks from the right side in the middle. Thanks, Mark

It slides into a track like SWISCO product code 39-505

I need two plastic strips that came with the casement windows originally. I believe this makes them weather tight.Caradco side windows 916 has big middle window it is bay type window Also would 39-505 entrygaurd be used on this type of winow? Thank you