Viewing all customer Discussions for:

39-505 11-3/8" EntryGard Track, 4 Hole

Contractor for a glass company here, just can't quite locate this casement arm. Looks to be a Truth #30744B, old one got so rusted that the pivot point where it attaches to the sash rusted off, so just need that pivot arm w/ rail.

This a Truth part that we need to replace. The one to replace is the right hand window - picture of intact one is the left hand window. Please advise if replenishment is available.

Hello, I am looking for a single arm operator for a left hinged, operating casement window-I know the picture shows a right hinged--we cannot open the left to get a picture.

the handle is loose, can't open and close

This part is on a 50-year-old Pella window. It will roll one way but will not let me roll it back.

Am looking to purchase like hardware for a casement window. I need the hardware for the sill mechanism and the track for the bottom of the window. The pictures shown are from the opposite window I need the parts for. The parts window (standing outside the house) is on my left side. Thank you! ... (cont.)

Markings: RH, 1Z,

Are you able to identify these operators?

I need a replacement operator for a Coradco casement window, hinged on the right side. There are two numbers on the arms, the top arm to the righ has 20755. The arm below it has 40577. I've attached four photos. The gear inside the mechanism is stripped. What part do I need?

I need this crank assembly. 4.5" arm. 6" arm. 8.5" arm.

Looking to replace 3 window cranks on windows. They are Polaris windows.

The Cardco window crank extension arm is bent. The long arm is 12" to the angle. The short arm is 5".

I'm looking for this part of window

Looking for replacement hardware for two (left opening and right opening) Norco window crank openers. Not sure how old these windows are. The hardware is marked "Truth Entrygard". Not sure these match your part # 39-031 and 39-032 as the shorter arm, stamped 20755, measures 3 7/8" and said part actu ... (cont.)

before I start replacing the hinges with products from your company, I was hopeful you would guide me on how to adjust the crestline casement window. As you can see from the photo the bottom part of the window is not flush with the casement- I have included photos of the gap, hinges etc. I have a nu ... (cont.)

Crank threads are stripped, window opens but can't close by crank. Hoping to go through and replace all in house. Windows ordered by previous homeowners so don't know anything more.

Window crank match.

THERE ARE 4EA WINDOWS, ALL OUTSWING, 2 EA LH, 2 EA RH. THEY ARE ABOUT 25 OR SO YEARS OLD,TRUST MECHANISM. OTHER THAN THE 20755 ON ONE ARM I DON'T SEE ANY OTHER MARKS. YOUR HELP IS APPRECIATED.

Hello, I have six casement windows (three right, three left) that have problems with the operators. For the most part, the issue is that the arm falls out of the track on the sash when attempting to open/close the window. In two of the windows the crank no longer moves the arm. Photos with measur ... (cont.)

Hello,I have ordered a bunch of the casement windows operators and all of them have been great! The contractor we are using on this last window, the track is missing, so he took some pictures and even measured the area we are missing. In speaking with Deb this morning in customer service she started ... (cont.)