Viewing all customer Discussions for:

39-505 11-3/8" EntryGard Track, 4 Hole

Do you have pairs of hinge arms that have a sash clip on end that attaches to the track? My windows are Biltbest Casements 1987. The sash tracks are built into the windows and go all along the width of the window.

Hello, Please see the attached photo. I'm looking for a replacement track for this window operator. Currently the track slightly bent in a few places causing the crank arm to pop out of the track in certain positions when closing the window. Can you tell me what part to buy? Thank you! ... (cont.)

include casement guide approx. 11-1/2" long. also, need handle and screw crank

Hi I would like to know what operator to order to replace this one. It is a truth entry gard with a part # 30744. I can find the truth dual arm that seems to match but this one seems to have a third arm underneath the top ones. Can I replace it with the regular dual arm? The two arms are 9.5 an ... (cont.)

Window guide comes out of rail. Entry Gard Truth upper linkage 20810 lower link 6809

Good afternoon. I talked with Marvin window company to help ID parts and they gave me two parts that they no longer manufacture. I am looking for one Marvin Dual Arm Roto-Gear Operator (Ultimate wood casemaster disc LA Pre 2010) and one Sash Track (Ultimate wood casemaster disc LA Pre 2010). The win ... (cont.)

Will need L & R

Contractor for a glass company here, just can't quite locate this casement arm. Looks to be a Truth #30744B, old one got so rusted that the pivot point where it attaches to the sash rusted off, so just need that pivot arm w/ rail.

This a Truth part that we need to replace. The one to replace is the right hand window - picture of intact one is the left hand window. Please advise if replenishment is available.

Hello, I am looking for a single arm operator for a left hinged, operating casement window-I know the picture shows a right hinged--we cannot open the left to get a picture.

the handle is loose, can't open and close

This part is on a 50-year-old Pella window. It will roll one way but will not let me roll it back.

Am looking to purchase like hardware for a casement window. I need the hardware for the sill mechanism and the track for the bottom of the window. The pictures shown are from the opposite window I need the parts for. The parts window (standing outside the house) is on my left side. Thank you! ... (cont.)

Markings: RH, 1Z,

Are you able to identify these operators?

I need a replacement operator for a Coradco casement window, hinged on the right side. There are two numbers on the arms, the top arm to the righ has 20755. The arm below it has 40577. I've attached four photos. The gear inside the mechanism is stripped. What part do I need?

I need this crank assembly. 4.5" arm. 6" arm. 8.5" arm.

Looking to replace 3 window cranks on windows. They are Polaris windows.

The Cardco window crank extension arm is bent. The long arm is 12" to the angle. The short arm is 5".

I'm looking for this part of window