Viewing all customer Discussions for:

39-520 13-1/2" Operator Track

I'm looking to replace this window crank. Do you have anything like it? Thanks, Charles

Hi. This kitchen crank window is at least 20 years old. I'd like replace the crank handle and base. The glass has a "Anderson 2-1" painted on the glass in sort of a white triangle. Please advise if you have a replacement kit for the hardware. Thank you.

Do you have these operators?

Hello. I need 2 left hand operators and one right hand. On the under side of the operator it says "ROTO P4000 " . I CANT FIND THEM ANYWHERE. this is for a vinyl clad casement window. Vinyl inside and out I believe. They look like commercial windows almost. They also have a multi point locking mecha ... (cont.)

1950 Andersen casement window operators, left and right hand, measurement as shown in photos, #2420 on underside. My research has shown that Andersen has a replacement part #7073A,B and a channel 0532108 that would also need to be used. They get $211 and $21 respectively for the items. I have 17 of ... (cont.)

Has a smaller sliding track opening. Already have gotten the one like the #39=520 and the slider opening is to large.I've sent photos. I hope you can help me. Janice

Andersen crank casement replacement. Can't seem to find one that is comparable.

I am having an impossible time finding replacements for these I hope you can help or direct me to others that might know where to get or have them.. thank you

I would like to replace these casement operators (see attached photos) I have six 24" wide windows that require a left and a right operator, for a total of six operators. The operators I have chosen are 3 EA 39-028E and 3 EA 39-027E Two 16" window operator which requires a left and right operato ... (cont.)

I need to replace this. The arm is 11 inches long. Can you help?

Need help identifying the correct single arm replacement 9 1/2 inch for home built in 1996 Truth hardware Vetter windows

Do you have this Anderson window crank and lock

Per the attached photos, I have a Geo Henne straight arm window crank that has gotten stripped. It is 9" from the center of the gear hole to the end of the arm. It was probably installed in the 50's or early 60s. I am looking for a replacement. I need both a right handed and left handed one. Can you ... (cont.)

We have original wooden casement windows in a 1910 house. One of the left window openers has become internally stripped and no longer functions. If it would be possible to come close to matching it, that would be great.The arm length is around 9" and I do not think they are original with the house. ... (cont.)

Hi, I do not see any brand or part number written on these. However, it seems like crank 39-021 would be a good replacement for the same window's crank. Thank you!

We have a 1958 house full of casement windows with window operators that are wearing out. Unfortunately I haven't found any replacement parts. I've uploaded two photo's of the operator. The words Anderson and RH are on the bottom side. Due you have any replacement parts or can direct me to a locat ... (cont.)

do you have these? no identification markings

A. Photos show a LEFT hand operator (I'll probably need a RIGHT hand, also).B. Note the tip "glide" point on the arm is a "DISC'", not the more common rectangular "SHOE".C. No other markings or identifiers on the window frame, glass, etc. (really? couldn't stamp a Model# next to your company name ... (cont.)

Looking for a casement window operator. Looks like a Detroit 2320. Is this still available or is there something that will work? Thanks

Attached are photos of an Anderson 7073B R operator and 7047R latch. Appears the consensus is to use the Swisco 39-365/6 to replace the operator. Suggestions reg. the latch please? Needs to be in white finish ideally. Thank you.