Viewing all customer Discussions for:

15-111 Pivot Shoe, 1/2" Thick

Looking for these parts to our Alliance windows.

Hello, can you please offer any help with determining what I need? When it was removed it had two of the plastic caps on top of each other. The coil does not have any markings or numbers. Thank you.

Need to find replacement parts for coil balance and pivot bars for simmonton tilt window. Please see attached photos. There ar no marking on any of the parts or the window.

Lower tilt out vinyl sash weighs -23 lbs and is 36" tall so probably need 35" travel. Old balance assembly has 2 coil springs as shown in picture. Springs are 1/2 wide with 5 stamped on one spring and #6 etched on other spring. Pivot shoe pictured checks 9/16" x 1 1/4" x 1" tall. No marking on spri ... (cont.)

Need replacements for 5 windows

I need replacement for quick tilt balance Picture to follow

Please help me identify these parts so I can repair my windows. You site is really easy to use and informative. Thank You

Simonton and Home Depot can't help. The windows are twenty years old andneed several parts. Hopefully you can identify them. Thank you for your help.

Hi , can you please help me identify these locks o need 2 for one window. Also need all the stuff in the track that keeps the window balanced. The pictures are from a complete window that is the same

I have double hung windows with with 2 coils to each constant force spring housing. The top coil has stamped on it 6.5 PAT5 8. The bottom coil has a 3 stamped on it. Both coils measure right at 0.496 inches diameter using a caliper. The top coil thickness is @ 0.181 inches. The bottom coil is @ 0.15 ... (cont.)

Two window springs and shoes

I am looking for a right side Milgard Tuscany Balance Shoe for a double hung window with coil balancer.

hi i need to find out what i need, the coil has a number 6 on it, i think this is a double coil but not sure

I am not sure of make sash weighs 19.5lbs

I'm looking to order 4 of the above parts for my Hayfield H201 window. They where manufactured in 2004. I believe this is called a quick tilt mechanism. They normally will slide up with the window and hold it in the up position.

The only marking on the part is a patent# 4 610 108.I assume that what hooked the spring to the shoe has broken off.Thank you for your time in this matter,Rich

THESE BALANCE SPRINGS ARE OFF OF MY BATHROOM PULLOUT VINYL WINDOW.THE WINDOW WILL NOT STAY OPEN. IT SLAMS RIGHT DOWN.DO YOU HAVE ANY REPLACEMENT SPRINGS. I NEED LEFT SIDE AND RIGHT SIDE. THANK YOU TONY

Markings say #5.5 and 35", PAT523208. I believe they're Simonton windows. I'll need to replace coils, shoe and support. Thank you in advance for your advice!

I need to replace the tension coil replacement spring and the housing the spring connects to. I don't know what the part is called. But I need both parts.

Does not need to be exactly the same. Number on coils are 35" #4.5 and other coil is # 5.5 35"