Viewing all customer Discussions for:

15-111 Pivot Shoe, 1/2" Thick

Need replacement springs at a minimum. Whole assembly if available.

Part # 801020Patent 5232208These are the only numbers I see. Someone said they think this is a constant force balancer. The window will only open a few inches. It is like the metal piece is crinkling up on the left side of the window. The piece needs to be replaced. Sure hope you can help us. The wi ... (cont.)

Windows are from Home Craftmans by Ply Gen Out of Dallas Tx installed in 2005. Have 4 windows with the same issues. Question also is how do you remove them from channel without disassembling the whole window frame? Only way I can see is cut the channel lips at the very top and then slide out and ins ... (cont.)

HelloI'm trying to do a window repair. I've had my windows for approx 10 years now, and this is starting to happen to a few of them. When I lift them up to open them, they slam down with full weight. I believe the coil (pic 3209) still works, but my thought is that the window jam (pic 2885)is the ... (cont.)

Need qty of 4 coil balance shoes. Item on the bottom of photo. Qty 4 pivot bar. ones marked needed. I need part identification. I disassembled the pivot shoe so they could see the components.

My window won't stay open. What parts are needed to replace the window coil balance? Pictures are uploaded. Thanks

I have 10 windows I would like ro replace this part. Do all windows of different sizes but same manufacturer all take the same. Would like to replace these before cold weather is here. Thanks.

Two springs in this. One says #6.5, 35" and the other is #3.5 35". I have Simonton tilt in window. There were two springs within this one balance. Thank you.

Hello, I am looking to replace some broken balances and tilt releases. The windows are single-hung vinyl by Simonton. I have a pic of the window sticker if needed. Model appears to be 2493061/02? Sticker also says PFSHWI F0303, and A3445S 65L. Any help would be greatly appreciated! Steve ... (cont.)

Sash weight is 25 pounds.

Do you have any of these replacement parts?Thank you.Nicolene

this is picture of my window springs i need to replace there are one set like this on each side of window frame. all the other parts are ok I need enough to replace on 2 windows.The longer spring has a omega number 5233208 #4:5 33' and the shorter one has 3 stamped on it They are 1/2 wide I had th ... (cont.)

Do you have these parts for sale? I need two sets, left and right, to repair two Simonton windows. I have the coils already. The window number is 01602968010002.

Hello, I am trying to replace a broken window coil balance, please see photos attached. The metal coil is broken into two pieces. The metal coil is 1/2 inch in width. However I can't find any other markings on the metal. The lock shoe is about 1" in size and has markings of "Patent: 4,610,108" on i ... (cont.)

approx 3.5 " long 1.25 " wide 1/2" thick appears to be stamped Part # 801020

Dear Sir,I have placed on July 11, 2020 an order for several items. The order has bee delivered however it turns the items I got were not the one I needed in order to replace my Pivot Shoe ½'' thick.The pivot show I got is 15-111 with dimensions Width 1 ¼, Hight 1'' and thickness ½ ''.The pivot shoe ... (cont.)

The coils are marked 6 and #6.5 35". I weighed the window and it weighed 21.5lbs. I believe I just need the shoe and pivot bar, but I want to make sure my coil will work with the shoe. Thanks. -Steve

Item 1. Two spring coils with plastic casing and screws x 10 sets ( ten pieces of 2 coils in plastic casing for 5 windows, each window takes two pieces) Item 2. Latches x 12 ( ordering 2 extra) Item 3: 2 pieces of 2 coil springs mounted in plastic with hardware and latches -2. Each side of the windo ... (cont.)

This is a single pane window. And I was wanting to replace all the hardware on both sides. These are Pictures of the existing hardware. If you could help me on what I would need in order to repair my windows. Thanks for your help.Anthony

We take care of hundreds of homes with older Pella doors that don't have serial Or model #'s on them anymore .This is a door bottom to one of those doors ( in the last 2 pictures) The first 2 pictures are of a door seal. I can't seem to find these & Pella isn't much help .