Viewing all customer Discussions for:

15-111 Pivot Shoe, 1/2" Thick

Hi, Attach are the pics of the part that I need to replace on a sliding window. The piece on the top that has broken. I sent a pic of the other window with the piece no broken and the part from the broken window If you could help me with finding the correct part I would really appreciate it ver ... (cont.)

1999 Simonton windows 35.5 x 59.5" Two balance coils each side. Both coils snapped on one side of sash. Coil supports mounted at top and pivot shoes at bottom of sash appear to match your 15-111. My coils match the ends of your S160-5, but my coils are longer than 35". Marked #5.5, 39" 061198. I ... (cont.)

Hi, I wasn't able to find these coil accessories on your website, can you tell me if you have them. Linda Lemons Glass & Mirror

Attached please find photos and quantities that I need to repair my Norandex single sash windows. Please advise as to price and availability of the same. If you need other information, please email me. Looking forward to hearing from you.4 windows: 25W X 32H 17 pounds each 1 window: ... (cont.)

I need 4 springs and shoes. The spring is a triple spring and has marking #4.0 35" 32208. I looked through the catalog and I think the shoe may be 900-19198 NS?

Hi need help identifying the coils and coil hardware for my windows. I have included photos and will send additional info in email 2. There are 2 coils on each side which state Omega 5.5 33"

Need appropriate springs and pivot bar for this window

I need to replace a few sash coils like the one in the picture. The coils are encased two pieces of white plastic with the letters g and h with four total screws.

I have Double Hung windows that are from the year 2000 They were manufactured by Corning. Need Balances, Pivot Lock Shoes and T slot offset hollow seals. I have both Single & Double Spring Balances but I have no Weight Identification.

This thing that holds window up cracked and fell down and now window must be propped open. The second picture shows on a window that is not broken all you can see is bottom edge of the piece.

can you find this part

Pin is flat with a small extension on end. One in picture was bent getting it out. It is 3"L x 4/16"W x 3/16"Deep. Is 1 10/16 from small hole to the back end and 1 1/4" from first large hole by pin to the back end. From the underside, the size of holes are reversed (small is large & large 2 holes ... (cont.)

Hi I need coil balances that look exactly like your S160 1/2" coil balance except that it has smaller inner/outer diameter, i.e. your S160 is too large. The markings on my coil balance are: #3.5, 33", PAT52320 and it is 1/2" wide. Do you have such coil? Robert

There are 3 constant force coils per side. The window weights 35.6lb the pivot brake/shoe is 30mm (1 1/4inch wide) by 30mm (1 1/4inch) high and 14mm (1/2inch) depth(depth of the channel. Looks like the coils are either 165 or 160 Pivot Shoe is either 15-111 or 15-191 Can you point me in the ... (cont.)

Our bottom sash weighs 30lbs and has a triple coil balance that needs replaced. We feel almost certain we need the Series 160 coils. There is no stamp identifier on the old coils that we could find. Do we need three of the 4.5lbs coils (13.5lbs) or three of the 5.5lbs (16.5lbs) coils for the 30l ... (cont.)

Have 20 year old single hung windows. One window is hard to open and close with a broken part under the coil covers on one side. Want to get all new parts for that one side but not sure what part numbers are. hope the attach pictures will help.

Need information on balance assemblies for Simington Single Hung windows. I have included a couple of photos of the assemblies. The springs are 1/2" wide and there are 2 springs per balance assembly. The lower parts of the assemblies are OK but the springs and upper portion of the assemblies are b ... (cont.)

Do you have the springs that work with the 15-104 shoe. Hurd double hung windows - 30" sash height.

Need help from bring his part

Hello, I have 3 windows roughly the same size that have all stopped working. The common part that is failing is the ribbon balance. One window the balances have snapped, and the others are bending when I try to raise the window up. I took a picture of the parts still installed, but can remove the ... (cont.)