Viewing all customer Discussions for:

15-111 Pivot Shoe, 1/2" Thick

I think its a series 140 quick tilt balancer but im not 100% sure and I dont know the weight.

I need to order the parts shown in the picture. The parts will not move up or down.

I'm trying to order a replacement of the attached part which slides on each side of the bottom of my window and then hooks into what appears to be the sliding pivot shoes on each side of the frame (I know very little about windows so please forgive me). I've been told that the part (a sash shoe?) ca ... (cont.)

My balance support is a double, 2 coils. It all fell out as I took it out so I do not know how the two coils were attached to the pivot which was broken. Can you describe how the assembly looks, orientation of springs in balance support and connection to pivot. My coils appear to be T160 a 4 and a 6 ... (cont.)

Hello, Working on a window and need the following parts. I've included some photos to hopefully help figure out the correct parts needed. 2- Single coil tensioner 2- Pivot lock shoes 1- Tilt latch Thank you Joe

Thanks in advance: Gentek 5G40A double hung Lookin for some hardware , need to start with some plastic sash inserts. Thanks again. Paul

We believe this is a Certainteed window from 1997 This part popped out. #4.5.78 PAT523208 Not sure if numbers after the # sign I hope this helps you identify the part number. And instructions for how to replace it. Thank you!!

Hello,I have two windows where both pairs of pivot bars broke off of the sash and both tension springs are missing. I've included pictures of the broken sash and photos of the bars and spring for an identical window in my home. Can you help me identify the new parts I need and how to repair the sash ... (cont.)

Do you have a replacement for these coil balances?

Do you have this part?

Need hardware for both side of the window all 4 pcs broken. Numbers that I can see are 5.232.208 and 5.365.638.

simonton vinyl window valance 5.5 35" pat 53218 I think. I need the slide in the frame and the plastic housing and springs.

On my windows the parts that let the windows slide up and down on inside of window are broken there are three windows these are vinyl windows and all three have broken on the bottom on both sides of the windows, there metal and bust into. When I try to open window it will open but not stay up sinc ... (cont.)

Hi,I'm looking for replacement balances that look like this(see pics). It is 1/2" wide and printed on it is 6.5 ( I imagine that means lbs) and 33"I see you have a similar balance the 165 egress that is 3/8 wide. Would these work? I"m really stuck as I can't seem to find a replacement. Would I also ... (cont.)

Window pro s 16csfr1201ans1z971-1984. The only info I can find on window.

I need four sets of coil balances for tilt out aluminum windows pictures are attached. The writing on the inside of the white plastic says oh and 137 Patton pending.

Here dimensions for this old shoe depth .5 inch height 1 inch width 1- 1/4

To Whom It May Concern, I've attached the parts of this window that I need. The three springs and the bottom piece I will need 4 sets and the three plastic parts I will need one set. Please feel free to contact me if you have any questions. Thank you, Dominick

I can only see the following #'s & name on the window Swiggle seal 111901 ODW-12-01 I do not know what brand window it is, all I know is it is a tilt in vinyl replacement.

window won't stay up. photo is of left side where part is missing. on the other side, the part has C2745 on it.