Viewing all customer Discussions for:

15-135 Pivot Locking Shoe, 1/2" Thick

Do you carry the window pivot shoes that look like the pictures attached? I believe they are the same ones used in this video on your website. Thanks.

What do you suggest to replace pivot bar in picture 2-1/2 "long 5/16 wide and 3/8 wide at wide end Your 26-021 matches all measurements pretty good but The bulge on end I worry about. The slides out of unit' Thanks Jack

single hung windows installed in 2005 looks like made in 2002 looking to replace all parts including pivot bar channel balance has a d (b or 8) fo (4 or a) and 23c nothing on pivot lock shoes 16/32 wide 1 1/2 long and 1 1/4 across tilt latch is 3 inches long also need to replace pivot bar which sli ... (cont.)

Hello, Attached are two photos of my problem. I think I need the plastic clips that attach to the counter weight. Symptoms are the windows will not stay up. Please let me know if you carry the parts I need, or if you can direct me in the right direction. Thank you, Mike

Greetings, The nylon cord for the right hand side of the balance on a tilt double hung vinyl window is disconnected. I need either to get a tool for reconnecting the parts or to get new replacement parts. I was not able to find the brand name for the window. Please find attached three photos w ... (cont.)

Hey, do you recognize this shoe? Am working with vinyl, single hung tilt window. If it helps you, i notice that the window does not have typical spiral balances. They are are a square tube that lets out a cord of some type. House was built in 2002.

1/2" THICK X 1-1/4" WIDE X 2" LENGTH

Hi - would you be able to help with finding the right part # for these pivot lock shoes? Moved into a house and the vinyl windows do not have any labelling whatsoever to indicate the make/model anywhere. Will need several of these. The dimensions are: length = 2" width = 1.25" height = 0.5" ... (cont.)

This is part of a large, tilting, vinyl, two panel window. The only identifying part numbers I can see are on the metal guide, and they are "30D" but I cannot see the manufacturer's name. Thanks for any assistance, Mike

Trying to find a replacement for a 1/2' thick tilt lock and also the pin/screw to connect it to the spring (probably a 1/4' diameter). Only marking on the plastic piece is a patent number 4610108 Thanks for any help Steve

This is the part that slides along the rail in a vinyl window

The pivot lock shoe I need is very close to several models you have, but mine is 1 1/4 wide x 2 inch high and 1/2 wide...only number on it is the patent number 4610108. Pictures attached. I need to order several replacements but want to make sure I get the correct one. Do you have this size? ... (cont.)

PATENT # US4610108 WE NEED 12 IF THEY ARE AVAILABLE.

My window has your sticker on it. What do I need to fix this broken part?

Hi Swisco, I need to purchase several pivot shoes that will work with the pivot bar in the picture. I previously purchased the 15-135 locking pivot shoe, but my pivot bars do not fit in the cam. Any suggestions on which pivot shoe will work with my pivot bars? t Thanks.

Hello I have some questions before I place an order. Can I replace this combination of Pivot locking shoe 15-046/pivot bar 26-040 with Pivot locking shoe 15-135/pivot bar 26-042?I think the second option it's easier because you only have to pop the pivot in the shoe, isn't it? Is the color of that b ... (cont.)

I need help locating replacement block and tackle that will replace one that is 1 1/4 x 17/32 x 1 1/2 for my window? Thanks

The shoe is 1 1/4 in. wide, 1/2 in. thick and 2 in. tall. The thickness of the bar which fits into the shoe is 3/16 in. I would really appreciate your help in finding replacements for these as the plastic is failing in most of them. I can find no inset to put the new shoes into the track. I ha ... (cont.)

​We are a company based in England, UK. I am trying to source a pivot shoe (see attachment). Can you supply the pivot shoe or do you know of a company who may supply this product. If is operated by means of a bent nose on the pivot bar. Note that where the F type balance enters the pivot block the e ... (cont.)

I need a couple of balance pivot shoe as shown in the picture. I couldn't get any markings. Any chance you could tell what part from the picture? The height is 2", the width is pretty close to 2". If precise measurement is needed, I will try to take it out. I appreciate your advice. Thank you. ... (cont.)