Viewing all customer Discussions for:

70-056 Screen Hanger Kit

It holds the screen in place opposite of the screen lock, pivots on the screws to allow screen to be opened

Aluminum screen clip that hooks to window frame

I have never seen one of these before. Not sure what it's called. Came from a discontinued Anderson Window Screen. Are these available? It also wraps around the backside

Ever who invented the pins to hold screens in is crazy!! They are dangerous especially with cats in the house.. My cat fell out the window.. Is there another way to secure the screens using pins that exist and something else...?? I come from the old fashion days where there were channels the scre ... (cont.)

The parts swing out

Some of the latches on my 27 year old windows are broken. It looks like your Malta screen latches are the same size, but is it possible to clip them into the existing screen? My screens are quite large and don't have holes; those that did were replaced some time ago. All I want is to see if there ... (cont.)

this is the clip that holds the screen to the top of the window frame

I need this type of clip for my screens. I cannot find anywhere. They are for a Weather Shield type window screen.

Hello. Photo shows my existing screen hangars and nails. It appears they are the same models shown on your website. If so, I need 6 sets. Can they be shipped today?

Please let me know if you carry either one of these clips.

I would like to make a window screen for the window I'm attached photo. The window frame has no channels and a slanted bottom sill. I had planned on inserting tension clips to keep the frame in place. Where would I insert these? One side and top? Just side? Any other adjustments or parts Inwould nee ... (cont.)

Greetings: I need brackets/hangers for window screens which are only about 3/16" wide. I've attached a picture of one which is in place. Can you help?

Can I replace my window screen knife hinges with plunger pin latches if I am making a new screen?

I've seen your 7/16" screen hangers and am wondering if you make one that will fit a 3/4" wood window screen. I guess the opening would be 3/4-13/16". I've seen lots of the 7/16" around (I guess for alluminum window screens) but haven't been able to find ones that will match what I already have on t ... (cont.)

I am in need of an exterior piece, u-shaped, metal, one piece, into which the screen slides. It is installed inside the window frame on each side, right and left, near the top of the opening. Obviously I don't know what it is called. See photos. Thank you.

Hi, fixing my screens which are currently held in with loop latchs. Saw this hole that is inside where the screen seats. It is a pella window. Is there a piece of hardware that attaches the screen to this hole?

Looking for these screen guides that are positioned at the inner top part of the frame. It guides and holds the screen within the window framw after latching it at the bottom insde window.

I have a Lincoln Log Home that was built in 1984. My window screens are in dire need of replacement. My local hardware store is unable to find the clips that hold the screen to the window sill. We put 2 screens in the sill to place the "clip" on - I need all new screens made. The # on the inner ... (cont.)

These metal clips hold window screens that are installed from the inside. They're mounted on the wood window sill and the sides of the frame

Aloha! I have proposed redoing the screens on the house I rent for the landlord. All the screens are wood framed and moulded. Fifteen of them --- all the ones for the double hung windows --- secure to the exterior of the window frame by way of spring loaded plunger pins on either side of the sc ... (cont.)