Viewing all customer Discussions for:

70-056 Screen Hanger Kit

Curious if you may offer some assistance. We have numerous double hung windows upstairs, I believe that they are Crestline. They are aluminum clad exterior and wood interior. There have never been screens mounted to the windows, evidently the original owner was to tight to purchase them. There ... (cont.)

Hi, We just bought a house that was built in 2000 and has the original windows. We have a cat that likes to sit on the on the window sill with it open. The screen pops out very easily, it is held in by 4 spring loaded pins that fit into a "dimple" on the window. can you tell the manufactur ... (cont.)

I am looking for window screen latches like the ones in the attached pictures. They are similar to but slightly smaller that the Malta # 70-048.

Good Morning, My house is approximately 50 years old. We still have our original Pella windows, and they are in good condition. We recently had our house aluminum sided. Although instructed to go around the outside hardware, the contractor removed all of our screen stops on the outside. Pella no lon ... (cont.)

I have aluminum clad Marvin double hung windows that have a removable aluminum framed screen. The screen is held in place by a channel at the top of the window frame and with a pin on either side that fits into a hole in the window frame. I've used your 70-009 pins to replace the pins in the screens ... (cont.)

Hi I'm looking to replace broken vinyl screen track on my vinyl replacement windows. The track is used to hold the screens in place outside of the double hung windows. This track is removable but I can't find a replacement anywhere. Any help with helping to identify this track would be greatly appr ... (cont.)

Hi, I recently purchased a home that has Andersen windows, both casement and awning-style. There are separate storm panes and the previous owners have used these white plastic clips which are sold as screen clips.In many places they are broke or cracked.What would be the best metal (more solid) repl ... (cont.)

I'd like to try to replace the broken plunger pins on my Marvin screen windows. Before I order them, do you have a guide to help me? I'll need about 100 plunger pins. Jerry

Hello I've posted a composite picture of what I'm looking for 1) Screen Clips for our sunroom. I think they are your part 70-028. I would also need the small metal screws . 2) Knife Latches (both right and left) for Andersen Storm Windows. I checked with a local Hardware store and they said thes ... (cont.)

The pictures are from a Thermal Gard window. The item snaps/slides into place and holds the Window Screen in place. There is no markings on this piece. Hope you can help. It's getting hot and can not open my windows!!!! Lol...

I can't find them anywhere! Been on the internet, window repair places, dealers, screen repair shops. no one has seen a clip shaped like this. The red colored tip clips into the frame of the window. Any suggestions? Thanks Paul

I recently received #95-150 and 95-151 screen corners. The part that goes into the alum frame is to large for the frame. The one that is in the screen now is shaped like the corner on 95-052. However 95-052 does not appear to have the channel to hold the screen on the hanging pin. Help. Jo ... (cont.)

Please see attached pictures for a plastic part that fits into a channel on the side of the double hung window that the spring attaches to. There is one on each side of the window for each of the double hung sections (4 total). The hook on the top of the part has broken off on several of them and t ... (cont.)

On your page labeled "Screen and Storm Panel Replacement Hardware", under the sub heading "pins" your picture shows a plastic clip that may be a part that I am looking for. Do you sell these and if so, at what price? Thank you, Sue

We ordered these and do not know how to install. The large screen seems to big and the small nail too small. how do you install these???? There is no information at all. Should the bottom be able to move. Please send me detailed information. we ordered 40 of 70-056 (Screen Hanger Kit) - Order 2 ... (cont.)

I'm trying to understand what you are doing. Are you replacing wooden frame screens, or are you replacing aluminum frame screens in wooden windows? If they are wooden frame screens, we do not have any plunger latch pins the length you need. Your best bet would be to go to an older Hardware store. Th ... (cont.)

the handles on malta screens on botton sides to secure screens to malta windows

I am trying to mount my screens to the outside of the windows. most of the windows have an aluminum "U" shape form on the sides and the screens slide down the U and are held in place. Will the 70-158 perform the same function?

Can I buy the 70-056 at any local stores? I am located in AC 20852 rockville MD.