Viewing all customer Discussions for:

75-005 Spiral Balance Charging Tool for Non-tilt Windows

Please help me decide which would be the best/closest choice to replace old balance. I have sent 5 of the 7 pictures I currently have ,but if you need other shots and dimensions I can take & send as many as you need . This is the first of what could become many balance replacements on this particu ... (cont.)

Hello! My Mother's house had "Silverline Swing Sash" windows installed when it was constructed in 1968; some of the spiral tube balances have been damaged over time and we are looking to replace them (note: this model has the shoe/foot attached). I have uploaded pictures of one, along with a pic ... (cont.)

Bracket over balance screw hole.

Hello, I have reached out to the general contact form and it was suggested by Jody that I reach out to the research team. I have ordered a few S400-29 and the 75-005 charging tool. However, I have damaged a couple of balances and a window trying to install them. After I somehow manage to put the ... (cont.)

To whom it may concern. Attached are a few pictures of a spiral balance I am having difficulty locating. Parts a from a fairly old (1950s ish ?) single pane double hung aluminum window. Any help would be much appreciated. Thanks, Luke

Very large aluminum AMACOR (Frost-Chek) windows in need of rebuilding. Very hard to open and close (very tight and heavy). Each side has (2) channel balances (pictures) with broken ropes, etc. The existing INTERIOR window balances have (2) balances with "4030" stamped on them and (2) with "40 ... (cont.)

Hi, Please identify this item. As per conversation with of one of your workers and part identifier in web site the size would be 5/8. It is a bit over half inch. Thanks,

I have a historic wood window in a house that cannot be reinstalled via weight, chain, pulley. I am looking for a spiral balance system for this window. It is a 39 inch sash for a double hung window. Can you point me in the right direction of what I need to purchase? I'm only seeing replacement sp ... (cont.)

Looking for 3 pr

So the window will not stay up. I assume the balance has no tension on it because they stay extended and they also do not stay connected to the shoe. So as stated in the subject, how can you tell if the shoe, balance, or both are bad? Thank you, Dale

I'm fabricating some large windows (57" or 58" sashes) and I want to use spiral balances. I'm not totally sold on spirals, but I want something to lift the window fully, as the windows will be fully lifted for most of their use, and they need to stand up. I can get an estimate of the weight and the ... (cont.)

Window weight 11.6 lbs Length of tube 31 inches Width of tube 9/16 From my investigation the right part with bracket 17-012 # 32 should do the trick. Let me know what you think. Dan

I have a balance with a special shoe. I need to order two 26", two 18", and two 30". Do I need to buy the shoes, rivets and balances separately? Also, I notice that the 30" comes in two comes in two color tips. Is that having to do with the weight of the window? I don't know what mine weights but ... (cont.)

I have old wood double hung windows , the windows were reframed and no weight boxes. Can your spring balances be used if the windows were modified to accept the balances and clips mounted into the frames? I realize i could have the whole thing replaced but its an older building and would like to kee ... (cont.)

This is what I know about the original parts.....they appear to be the 400 series with the 3/8"diameter, 26" long and the window itself weighs around 26 pounds. The clips are like the # 13 ones on your webpage. It's interesting how they mounted the # 13 clips to a 1/4" thick removable nylon "gli ... (cont.)

There are a total of 8 spiral balances that are broken. I'm not sure they are the proper weight support or not.

A client of mine has General Aluminum no tilt out windows in their town home in Colorado. One of the windows has a damaged spring balance and missing the bottom clip. I need help identifying the bottom clip to purchase. I have included photos of the good balance clip as well as the channel with the ... (cont.)

I have 12 non-tilting vertical sliding windows. All the same height. 10 are the same width and 2 are a bit wider, but mechanically the same design. I'm not certain what series these are for replacing the spiral cartridge nor how to remove properly for identification. I've seen your video where you ... (cont.)

Hello, I purchased 20 springs (S400-34) and 20 brackets (17-043) a few weeks ago and am now trying to install them. Unfortunately, the brackets are not compatible with the springs. The picture of the bracket shows several measurements... but didn't show the measurement of the depth of the throa ... (cont.)

Hello, Trying to find replacement for several 25"long, 3/8" diameter with mounting clips window balances. The track is 3/4" deep and 1" wide. Attached are photos. Thanks