Viewing all customer Discussions for:

75-005 Spiral Balance Charging Tool for Non-tilt Windows

Part is 21 in. long and diameter is 5/8 in. It has a number 2 on the spiral and also word unique. We need 4 of these plus 4 brackets that attaches it.

I have several windows that have the spiral balance system that are failing. Originally purchased and installed by "Jacobson Windows of Tampa, FL", which now appear to be out of business. The spiral balance rods are dropping out of the tube at the bottom. As best that I can see is that the "Shoe" ... (cont.)

I can not seem to find this part... Can you please help

This window is a General aluminum non-tilt window with spiral balancers. There is no way to remove the sash from the frame. How do I replace the spiral-balance in a window like this? On the bottom of the sash there is no obvious shoe to attach the balancer to. Please offer some guidance... ... (cont.)

Look for this just order the wrong one

I see no bottom mount, appears to just catch in bottom of window.

Greetings, The nylon cord for the right hand side of the balance on a tilt double hung vinyl window is disconnected. I need either to get a tool for reconnecting the parts or to get new replacement parts. I was not able to find the brand name for the window. Please find attached three photos w ... (cont.)

Non-Tilt Spiral Window Balance Tensioning and Installation Tool

I've tried several Swisco orders trying to make my windows work again. In the attached photo, the one at the end is one of the Swisco Series 400s I tried. The original is fatter, but when I tried your series 500, it was too tight, and my handyman would have to carve out the channel to make it fit ... (cont.)

I am looking for a tube balance clip or foot for the above window. They are Pan American double pane windows in aluminum frames and the house was built in 1985. Unfortunately all of them are missing so I don't have a part to show you. The channel there is about 9/16 on the short side and about 7/8 w ... (cont.)

need tool for model 96-100 "Barrier Enterprise " AKA Preservation HS.com double hung windows. Do you know where this tool can be purchased.

I have an old window which does not have counter weights and no pocket in which to install them. The window is 36"w x 31 7/8"h and is 1 1/2" thick. It weighs 27 lb. I want to install something to counter balance the weight of the window. Would a spiral balance or channel balance be suitable? If ... (cont.)

the spring measures 3/8 don't know what series to order it is 30" long

I have a house that was built in 1948 I am looking to replace the attached parts on 20 original wood windows they all look the same but the tube is different lengths. The tube is 28 inches long on the attached pictures Can you help me identify?

need to id the attached spiral pic. 23 inches long, 5/8 diameter. did not see anything on your web site to match the bottom part of the spiral. no identifying numbers

I have these failing channel balances, and would like to replace them, just so no one looses a finger in the window. The balance failed, and let go from the part that attaches to the moving part of the window. I removed it and took some pictures of it as well as the one that is still on the window ... (cont.)

We want to build several wood sash windows. Customer does not want vinyl windows. We need the hardware for double hung windows. If we provide sizes can you provide quote for needed parts?

From single hung tilt window, circa 1995/96. No maker markings, channel counter pull has markings of "J C2730" or "K C2735" depending on window (which I presume are 27C 770 series channel pulls). Uncertain of how thick they are -- there are four nubs or raised spots on front of slide. If you don' ... (cont.)

I have installed,but window didn't appear to have clip to hold it. It seems like it just goes up the hole. Should I add the piece of hardware that goes under the sill or is there a clip that fis in the hole?

I am making 14 new double hung wood windows, not tilted. Top part will be fixed, just bottom part will be moving. Window size 33" X 88" Can you provide me with all parts specification which I need in addition of Spiral balances to make bottom part open. Thank you.