Viewing all customer Discussions for:

75-006 Spiral Balance Charging Tool for Tilt Windows

I am looking for the parts to fix 2 Windows that will not stay up and the plastic trim along the bottom of the sash. The trim is square in shape. The Sprial shaft is 29" by 3/8". On a tag I found on one of the Windows is has Series 900 ANSI-AAMA 101-88 DH-R40 MST 3860

Rusco 22 inch, 5/8 inch orange tip spiral balance

I bought a repo that has 15 of these 36

Original install 1994. Window latch shows "Haras inc". Difficult to use. Has spiral balance. Released tilt latches at top, tilted in but unable to release from shoe. Want to remove to clean and check balance parts.

We are planning to replace Pivot Lock Shoes for 3-5 Windows. But not sure about the exact part number. The approximate dimension is 1 1/4 x 1/2 x 2 ( W x D x L) Width: One and quarter inch Thickness : 1/2 inch Height: 1/2 inch Also, please let us know if you provide Windows Repair services. ... (cont.)

Can you help me identify this pivot shoe?

Do you still carry any Patriot window parts?I am looking for a replacement sash for a double hung window and a balance spring.If there is any chance you can help me I will forward more details.

I need several pivot shoes for my Great Lakes windows. Your 15-015 pivot shoe has the correct dimensions, however, the pivot shoes in my windows have a brake so that the window will not move when tilted. I would like to get a pivot shoe that has a brake. Does your 15-015 have a brake? If not, co ... (cont.)

Size is 2inch tall by 1 3/8 wide an about 5/8 depth

Hi All, My window will not stay when i open it i look into it and release that pivot lock shoes are broken. Attached image show what i can see, i think its about 2' long and about 1' wide, also i think i need spiral window balance i would say its 36' or more long. i will gave you more acurate mea ... (cont.)

Windows have spiral balances and plastic shoes. Some shoes seem to be broken and will not hold the balance in place. The flat end of the balance has two raised bumps that seem to fit above and below the shoe probably to keep the balance from moving vertically once seated in the shoe. windows were in ... (cont.)

Hi Can you please look at attached pictures and give me a call I need to order some parts Thank you Fred

My Windows will not stay up and the screws on the very bottom (underneath) touching the bottom frame of the window are rusted. So I need all parts to replace the problem of the window not holding up and the screws as well. I am ordering the weather stripping 3/16 t slot today but figured I get all ... (cont.)

see the picture that the while shell is 28" x 9/16", with tip measured about 29", which replacement is the right one? I may need over 12 pieces.

Need 'pivot locking shoes' for several windows, (10 'shoes'). Sold under name Acan. Cannot find an exact duplicate in the photos you have posted. (See photo). Thickness 9/16". Will also need new spring and installation tool. Let me know if you need more info. Tad

I'm looking for replacement parts.. Not a good pick but I'm having a tough time removing them. Additionally I need replacement springs, I can not find anything that resembles the ones I have. What I have appears to be a spring inside a tube and does not resemble the balance springs I see on this sit ... (cont.)

I have Alcoa Windows that were manufactured 6-9-1994. They show to be a model 2V2H9L, which are single hung windows. The Spirals have white tips. I'm also looking for the weatherstrip that goes on the bottom of the sash against the sill plate. It attaches to the bottom of the sash. Do you carry ... (cont.)

We have a new home with seemly relatively young Ply Gem Double Hung Series 800 Windows. Not sure when the actual manufacture or install date was. First, wondering if you sell the window stops, as pictured in the attached. Second, despite cleaning. lubricating and many attempts to adjust the s ... (cont.)

I believe these are 900 series. They seem like 3/8 thinner type but measure about 1/2" Can you identify the shoe?

Not sure whether I need the 17/32 or the 9/16... your help is appreciated