Viewing all customer Discussions for:

75-006 Spiral Balance Charging Tool for Tilt Windows

Attached is two photos of the Pivot Lock Shoes (one is functional, the other one is shown as broken). The measured size is 2 3/8 inches high x 1 1/8" wide. I hope this information is helpful. If not, I will try and gather additional window information. Thank You for your time in this matter, ... (cont.)

S200-32 did not work out. Need correct balance ID

Gentlemen, My vinyl windows are dated (on glass mullion/spacer) 81 (1981). They may have been sold through Sears, but I can't be certain. First attached composite picture shows my existing hardware, and a detail of one of your pivot shoes that has the same cam slot dimensions as my shoes. ... (cont.)

Hi, I have been reading answers to questions regarding balancers and I just need to verify my needs. I'm pretty sure I need a 900 series. That top white one is broken good. the plastic encases the metal tube. It looks like 5/8" diameter the other two are 3/8" Regards

The window I am working on is a Champion manufactured window. The window weighs 40 pounds. Currently the window has a red tip spiral counter balance. From your information it appears I need black tip counterbalance because of the weigh of the window.The current red tip counterbalance is 5/8 in diame ... (cont.)

Hi, I spoke to someone by phone this morning concerning replacement window spiral balances and pivotal shoes. I have attached some pictures of the replacement parts I am looking for and can be zoomed for better viewing: Image #FullSizeRender - is end on to show diameter Image # 0725 - is a brok ... (cont.)

This is Carmen from Sterling Properties. Please tell me what part this is. Thanks.

In your notes you say the spiral balances are shipped ready to be charged. What do they need to be charged with?

I'm looking for these spiral balances. They are wrapped in a white plastic casing. I'm not sure if that casing has a purpose or not, but I was told by another supplier that I had to get the exact ones. My balances are 26 1/2" from rod to rod. There 3/8, and are blue tip. The supplier said that he ne ... (cont.)

Good morning, l talked to one of your reps last week who advised me to send these pics. The length of the balance is 22" for each of three windows. Iam going off memory so that number may change. I am not savvy on using my phone to do this but l will try to send 4 pics. Thanks

Hello, I need a couple tilt window shoes. Pic is attached. Number on it is 503c. Non color cam, measurements i got are 2 1/4" tall x 1 1/4" wide x 9/16" deep. I could be off a 1/16". Thanks, Steve

I need a video on replacing spiral balances. I have some extras that I can use and/or need to replace the ones in the current windows. All windows are TG from seasonall.

Greetings. I need to order the replacement bar that goes from the window to the pivot shoe, at the bottom of the window. That snapped off, and now everything is free-falling. I don't see them right away on the order sheet. Thanks for any help that you can provide. It's a tilt window, made by F ... (cont.)

We have metal tilt out window want to replace springs. metal part 28 inches spring 18 5/8 . There is plastic part on top window where it attaches that does not look like your website see pics. Do I need 2 stops 55-063, 1 tool 75-006, 2 5/8" tube balance do I get 600 series?

This Pivot Shoe is from a Tech Weld replacement window I installed in 1993. The Pivot Shoe is 2 5/16" long; 1 3/16" wide and 9/16" deep. I would like to get 3 or 4 pivot shoes, if possible

Hello, I ordered some parts from you to fix the spiral tilt window balance on my window. When my son tried to install the new parts, we noticed that I did not know to order another part. My windows were installed a number of years ago and they are older windows, so the part that broke is metal. ... (cont.)

Need to get replacement parts and tensioning tool. I attached a photo showing a spiral balancer 25", red ended, tube looks like it's 1/2" must be 9/16" or 5/8". I need 10 tubes, the tool and probably should order some heels(?), toes(?), shoes(?) whatever the balancer hooks into...B^) Thanks for your ... (cont.)

I have a 23 inch balance 5/8 diameter w a red tip. The window is a patriot 82.

Balance and shoe ID

I found a post on your web site about replacement spiral balances for tilt windows that would work on Carefree windows. I ordered two 900-27 spiral balances. My bad they should have been 900-26. the end that fits in the pivot lock shoe does not fit in the shoe in my windows the two nubs as I call th ... (cont.)