Discussions for 75-006 : SWISCO.com

Charging a spiral balance

Sure, I'll do my best to clarify this term.In short, charging a spiral balance is when you wind the spiral rod in place to allow the spring to build up tension. This is necessary during the installation process for just about all spiral balances.The easiest way to do this is to use a special tool ma ... (cont.)

Cork srew balance

We have 3/8 diameter sleeve at 34 long. Not sure of weight of window but is tilt . Any suggestions

Series 900 Spiral Balance Quote

My balance is a 3/8" diameter tube and the tube is 33.5" long. They have a yellow plastic band on the tube. My windows are tilt and raise. I need 10 balances for 5 windows.

Tilting window spiral balance help please

Hello, The top part of the window keeps slipping down. Does that mean I should replace the spiral balances? Tilting window spiral balance, window dimensions 23 1/2 " ht x 30 1/2 " width. Pictures attached Thanks for your help. Best, Josh

Pivot shoes and spiral

Hi, I need to replace 4 pivot shoes and 4 spiral balance rods. My windows are measuring 52.5 tall and 29" wide from molding to molding. Can you please send me links to the parts I need to purchase? Thank you!

Tilt mount

I need the tilt mount for a 3/8" spiral valence, both track and sash.

Need replacement sashes

I have some windows that barely open. I believe the spiral sash is the issue. Can you help me identify the part?

Pivot shoe

I have a NEWPRO window that needs a couple pivot shoes. As you can see by the attached picture it shows one that the shoe is good and has the spiral balance assemble attend to it. The 2nd picture shoes that the shoe is broken, the part of the shoe where the spiral assembly attaches to is broken. It' ... (cont.)

Spiral balance for single hung tilt sash. 5/8" diameter tube 22-3/8" long.

8 windows with all the same balances. Also need to identify the tilt slider shoes will need removal tool and spreader tool

Need Window Parts

I wonder were the pictures I sent enough to decide which model I buy. My sash is 17Lb. heavy and 26” high. I also would like to know how much the spiral bounce tool and the shoe are where the spiral bounce is attached. I need 2 spiral bounces, 2 shoes (if price is within few bucks), one tool ... (cont.)

+1

Window issue

I cannot find markings on windows and I can't get the sash to come out of frame so can't get a better picture. Trying to fix and determine parts as the window will not stay up.

+1

Spiral balance

HSA. O

+1

Pivot Lock Shoe

I have Lockheed Window NUCON double hung windows that need the pviot shoes replaced. I have attached a few photos. Please let me know if you need further information

+1

Tilt windows

There are no markings anywhere.It's a condominium complex. "The Pines" It was built in 1985 in SHOWLOW, AZ 85901. Are you able to figure out what brand these windows are? I would need the hardware for two windows left and right side. Tilt locks, tilt guides on bottom of tilt window, left, and right ... (cont.)

+2

31" red tip spiral balance for non tilt windows

Hi, none of the 6 double hung vinyl windows in the house I just bought will stay open. The spiral is the same for all of them. 31" long, red tip, looks like the s400. In a few of the windows that I managed to force up, the red tip was shattered. There's grease everywhere. The windows are marked 198 ... (cont.)

+2

Need Pivot Shoe

Hi, Hope you can help me select the correct Pivot Shoe for my older Vinyl Windows (30+ years old). Attached are photos of the current Pivot Shoe. I believe it's 5/8" thick x 1 1/4" width x 2" Height at corners (Note: Height at center is 2 1/8")Looking forward to your guidance. Thank you, ... (cont.)

+3

The shoe from a spiral balance system

Above is the sticker for the widow and a picture of the parts I need. The shoe is 1/2 deep and 1 inch wide

Pivot shoe

Looking for part for Sunrise slider windows

+5

spiral window balances

29" long, 5/8"

Phillips window repair parts

I need 14 red tip spiral balances. They are 26" tube...3/8" wide tube . Also 6 green tip spiral balances 26" tube 3/8"wide tube . 10 pivot pins . 4 tilt lashes 2.5" long by 5/16 wide . Thank you Jim Schuler

Viewing all customer Discussions for: 75-006 Spiral Balance Charging Tool for Tilt Windows

Viewing all customer Discussions for:
75-006 Spiral Balance Charging Tool for Tilt Windows