Viewing all customer Discussions for:

81-223 1-1/8"dia Replacement Steel Concave BB Wheel

The measurements are 4 7/8" Long 1 5/16" Tall and 3/4" Thick. The Rollers are 1 1/8 in Diameter

Hi I'm locking for roller closet door part # 136089 the wheel 7/8 "and the thickness 1/2"

Hi , Do you have these wheels by chance? Thanks Michael

The uint is 28.42 mm high, 17.86 mm wide. The roolers are steel and 22.03 diameter wheel in channel (may be worn some, and 25.40 diameter ridge.

If the rollers and the bearing with the shaft is available I can insert them into the metal housing. The plastic roller and bearings that are worn out.I currently need (4) rollers with bearing and shaft.Thank you Tim Dodge DBA Mr Fix It.

From circa 1995 Marlin Windows, in California. Marlin Windows has undergone ownership changes since then so they recommended I use your service. Thanks!

There is no name on the doors so not sure who made it. It matches one of your items but the diameter of the wheels is smaller on mine. Will that still work? It matches your item product code 81-087.

Attached are pics of wheel assemblies that I am having trouble matching. I could have sworn you carried them at one time but I no longer see them on you site. The distinctive feature is the two flared cut-outs on both lower sides of the assembly. I have ordered a package of 1 1/8" wheels & several p ... (cont.)

Would u have replacement track and wheels for these doors. They're bypass doors

my rollers wheels are 1 1/8", the length is 3 1/8", the height is 1 1/8", and the width is 3/4". Canyon recommend a replacement as I see a few in your catalog that may work. I was hoping that you have an assembly with ball bearings that would fit my door. Please help!

Metal is all brass. Old measurements (some wear may have occured?): Wheels measure 1-1/8" Housing meaures 3-1/16" long, 11/6" wide, 1-1/8" deep Flange has hole, not slot, and is above the housing

There is V embossed on one side of the housing at the opposite end, toward the screws. I believe the doors are Pella doors. Thank you.

I need to purchase 2 replacement rollers for a sliding door. The rollers are on the bottom of the sliding door. There are metal guides on the top of the sliding door. The length of the sliding door is 78 3/4 inches. The width of the sliding door is 37 1/4 inches. The side width of the sliding door ... (cont.)

I need replacement rollers for the sliding door

11/16" W 1 1/8" H Wheel diameter 1 1/16" There are no markings on the hardware. It is from a slider in a Four Seasons Sunrooms sunroom.

I purchased replacement rollers from Amazon which appear to be an exact fit. They fit just like the original rollers in the door bottom but I cannot get the door over the jam and on the track. With the wheels turned all the way in, I tried lifting with a small crow bar and cannot get it over the flo ... (cont.)

Assembly if 5/8" wide, 2 3/4" Long, 1 5/8" high, and wheel diameter is 1.25". Door dates from the 60's

Good morning Can you supply price and delivery on steel cable roller per attached pictures.The bearing is R4RS with 1/4" bore.1.12" diameter..396" face width..26" wide across inside of groove. Need 250pcs.Please acknowledge you received this email. Respectfully

A Swisco help expert asked me to pry that housing out of the door so he could get a better look at it. But I'm afraid I might damage it and not be able to replace it. The rectangle I was able to measure is 2-1/4" by 11/16". That agent thought you might want to see the photos I sent to him. ... (cont.)

11/16 wide by 1 inch tall by 4 1/4 long. Wheel is 17/16, or 1 inch plus a 1/16th. The hole on top is 1 1/2 inch in center of hole to end. There are no numbers or markings.