Viewing all customer Discussions for:

81-223 1-1/8"dia Replacement Steel Concave BB Wheel

Is there a replacement for this or something i can make work? length 3 1/4 width 3/4 height 1 3/8 Wheel 1'

I didn't see any significant markings. outer wheel diameter is just over 1.125" inner wheel (center groove to center groove) is approximately 1" chassis is 1.250" tall x .625" thick and 3.125" long

Wide 5/8 inch, high 7/8 inch single plastic roller

I have struggled to replace this. The roller is 1 1/8 inches. I can only find 1 1/4 rollers. Neither side is in good shape would like to replace both complete parts, not just the rolled if they are available. Patio door is 20+ years old.

Hello, I have been trying to locate a replacement for the pictured door rollers. What seems to make this difficult are 2 things - 1) Roller wheel is 1 inch diameter and 2) It appears to be called an F tab where it attaches to the underneath of the door as apposed to the end. On one of the pictures y ... (cont.)

House was built in 1972 and we think it might be the original door

Hi, I removed these rollers from my daughter's very heavy glass patio door. I spent 2 days and many hours trying to find the entire bracket units. I even tried finding just the rollers themselves since I had the brackets intact. No success. I had to put them back on the door & reinstall door ... (cont.)

My sliding door is 30 years old and I need a new roller assembly. The pictures above were roller I bought at Ace Hardware and they ran out. I need one more to complete job. Notice the screw that is used doesn't have a nut on end but rather the screw goes through a housing neck with does not require ... (cont.)

I need 2 of these. Possibly 81-269.

Door is a heavy aluminum door, I believe by MI. Length (as shown in photo): 2-1/4"width (widest point): 9/16"Height (casing only): 1-1/8"Wheel diameter: 1", concave roller Marked with "Ultra" brand. I gather from searching that they are not made anymore.

Last photo marking A-S 8193

Need to identify and purchase two single rollers for my sliding glass door. The dimensions and diameter of the wheel is 2 3/8' L x 1 3/16' high and 9/16" Wide as shown on uploaded picture with a 1 1/8" wheel diameter. PLease advise.

Trying to replace my sliding glass door rollers. It is a complete track with rollers that go on the bottom of the door. Help please!

The rollers are installed into the styles

Need 2 door rollers - tandem 1 1/8 inch rollers 1 In wide at tabs Body 3 1/16 long frame 1 1-16 tallDan

Wheels are 1.125" diameter. Frame is about 11/16" thick. It's about 7/8" thick at the flared section. Overall length from mount hole to end of wheel is about 4.5"

I have not been able to find any part number or manufacture marking on the current roller assembly. The pictures provided include the dimensions. The roller assembly has a nylon/plastic single wheel that is 1-1/8" diameter.

Hi, I need help finding patio sliding door roller. Please see attached photos and let me know if I should provide more information to track this part down.

Need to identify this particular metal roller which screws into the bottom of my wood sliding screen door. Thank you in advance for your assistance.

Hi there, I am helping my friend fix her sliding glass door The center door is the only pieces of glass (there are 3 panels tot) that moves and one of the rollers popped out. Ideally I would like to replace both rollers, use the existing frame and glass, but I cannot figure out how to get the s ... (cont.)