Viewing all customer Discussions for:

82-003 Sliding Door Handle Set, 3-15/16"

Hi - I am trying to find out which locks I could purchase to replace two locks on two different sliding doors Please see the pictures for both doors.

Can you please help me identify a replacement part? Thanks

First photo shows the outside handle. It's profile has somewhat of an "S" shape. It has a key lock in it and is not broken. The second photo shows the inside handle which in this photo is not broken . On another identical slider there is an inside handle that is broken off. Is a replacement availabl ... (cont.)

The locking latch was broken by renters and I can seem to find a replacement that will fit inside the given latch slot. Do you have a recommendation?

trying to replace this door handle on a sliding glass door- the outside handle is glued and can't get it off but the photos are of the inside handle that was broken. I have measured the distance between the holes and it looks like 4 inches but I can't tell if I am doing it correctly. please help ... (cont.)

On the inside, this is stamped Sash Controls Inc 060-1255. Based upon some previous threads, I ordered a 82-035 which is not a fit due to the thumb latch configuration. The door width is 1-3/4" with 3-15/16" hole spacing. Matching the door width has been an issue in the past.

Metal on the top of the handle broke, the silver lever turns to lock the door. 96 yr. old Aunt hates to replace door, hoping to get a new handle. Any hope?? Couldn't find any ID of type of door it is.

Need a replacement handle or a whole new set, whichever is needed.

Hi - I am a kitchen & bath designer and need new hardware (or just lock) for my 1962 sliding patio door (42" w by 8" h double pane glass.) The ctc is 3-15/16" and there is a screen that closes outside of the glass at a 1-3/4" clearance for handle and lock. The biggest deal is the door is 1" th ... (cont.)

I have this handle and it is labeled with "Allen-Stevens Corp" with what I believe is a part # of 1965. The holes are 4" on center and the door is 1 1/8" thick. I need a new handle, new locking mechanism and two bottom rollers. What parts do you suggest? Thanks

Do you have just the chrome lever that operates the lock?

This slider is from 1977 Need new lock and handle set

Need a replacement

Our old handle finally snapped (we no longer have it), and we need a replacement. The door is 1-1/16" thick, and the bolt holes are 3-15/16" on center. The oval holes (cut into each side of the door frame) through which the hook latch is actuated is 1-1/4" x 15/32", and the opening on the side of th ... (cont.)

Heavy slider door that slider left to right when opening, vice versa toClose. Please contact me so I can purchase from you a proper replacement. I spoke to a woman on the phone a few weeks back who asked me to download a photo or two. She was VERY helpful. I would like tk give you any business I ca ... (cont.)

Handle okay but frame broken

Hello! I was wondering if this handle (82-003) would work? The lock seems to be broken and there is no latch. Hoping to replace the whole handle as it?s very old. Also, do you know what the holes on the top of the door used to hold? The safety latch? Thank you!

PPG HERCULITE -K TEMPERED SAFETY GLASS 16CFR1201CII ANSI 2 97.1-1984 1-8''0 SGRC 1110. 4014086 hi. above I listed the information about the sliding door because I need a new door lock and handle for it since it broke as seen in the picture I uploaded. Thank you.

I have a very heavy patio door with a broken handle and the SWISCO purchased for me through a local door company lasted one year and recently split the metal and broke. I need something heavy duty that will fit 3-15/16th in black or a dark color and it looks like 82-033 may be my best bet? ... (cont.)

I am looking for a replacement Sliding Glass door handle and lock for my existing sliding door. The handle /lock has Allen Stevens Corp, N Y C stamped on the inside of the handle.