Viewing all customer Discussions for:

82-005 Surface Mount Sliding Door Handle Assembly, 4-15/16"

Hello, I want to change my handle to be able to lock it with keys and lock from the inside. Currently, it only latches from the inside. Can you please advise what is needed to be able to do this upgrade?

Hello, I am looking to repair the door lock or replace the whole handle & lock assembly.

have 1960s era aluminum sliding glass doors. Looking for the latch and cylinder assembly that is inserted inside the door because the latch hook (the end that hooks over the keeper on the frame jamb) broke off. The alum door is approx 1 1/8" thick, and the cylinder hole where the cylinder inserts ... (cont.)

The pics are the inside and outside handle for a slider?can't locate part number but we found a sticker that seemed to indicate that the manufacturer was Peachtree Doors

Good morning, We are a commercial glass shop. We do not normally work on residential sliders. Can you identify the lock hardware in the attached pics? The interior locking lever arm broke and we would like to purchase a replacement. Thanks, Mike

Looking to replace my existing handle/lock assembly with a working one. I'd also like to add a mortise (i believe that is what the inner locking mechanism is called), as there is nothing as seen in the pictures. Not sure how old this is, but could be original to the house , 40+ years. Any help with ... (cont.)

We recently bought a house with a large sliding glass door leading to the patio. It had an after market handle on it when moved in and it promptly broke. We've replaced now a couple of times with cheap lowe's brand but they break quickly. The existing handle has 6 9/16 screw spacing. I can't find a ... (cont.)

I am trying to find replace part for patio door handle. Thank you for your help

This latch is on a Keller or Alenco glass sliding patio door. It is 7.25" long, 3/4" deep, and about 1" wide. The latch works but need the latch plate or new handle and plate.

this handle was broken, hole spacing is 4", it's a hook style, i bought one does not fit. please help. thank you. g

This aluminum door had a lock which was a flush mount on the exterior so the screen can slide past. The screws are 4 15/16 inches apart, the length of the opening is 7 3/4 inches and the length of the actual plastic handle is 8 3/8 inches. The exterior handle I have pictured is from another door wit ... (cont.)

House was built in 1984 , looking for glass door lock

My patio door handle assembly this was patten by alcraft the door is 30 years old works great but the dicast on the outside cracked where the bolts go threw hope you can help me on this? Thank You Ken

I found a handle that fits the door (your Legacy Keyed Handle Set 3-15/16" (1-1/8" to 2-1/2") but it does not have the lock, or that little hook that comes out and hooks to that little piece on the doorframe. can you advise as to what handle and lock will work for this door(I have looked around the ... (cont.)

I looking to find a lock for this door. It was not there when my in laws moved in. The measurements are 2 3/8 inches from the center of the top screw hole to the center of the bottom screw hole. the lock slot is about 1 3/4 inches.

The house was built in about 1985 in Nova Scotia. The name on their of the inside door handle is Lockwood. There are code numbers on between the panes of glass. One code is: Lock-pane CMHC 5164 I.D.S. Another code is 84-10. Thank you.

The attached photos are indoor and outdoor of the handle.I dont have the name of patio door. + 25 years old.Thank you for your help.Pierre

THis is an old - maybe 70's - Acadia aluminium sliding glass door - handles. We bought the house and all of the locks were removed. So I am trying to replce the door hardware and locks. Looking like the holes measure 6"

I have a door handle that is broke and I need replaced

Need a replacement door handle, with a key lock. I don't know the year but I did notice the brand is PARLYN the numbers on the handle are shown in the picture.