Viewing all customer Discussions for:

82-005 Surface Mount Sliding Door Handle Assembly, 4-15/16"

Hello and good day, I hope - I have a patio door handle but the other half of it came off in pieces. This is a 2-sided handle - the interior side is shown and the other side had a plastic exterior handle which cracked into pieces. The markings on the back of this piece are:Canadian patent #919213 ... (cont.)

Do you have replacement handles for this type of door?

Hi Everyone My patio door handles continue to fall off. I would like to replace these permanently. Marking GLW on the door and I believe they are 6 1/2 inches. Could you advise me what to order to replace these?

The lobes on my patio door are broken off. The patio door was installed when the house was built in 1986. I have no documentation or identification on the door. The door latch must be a low profile with 3 1/2 inch centers on the mount screws. The door latch hook locks into a slot cut into the wall-m ... (cont.)

I need new interior handles for 6 old sliders. The original handles have attachment screws that are 5" apart. Thank you.

Hello. I would like to know part # 82-306 is compatible with Part # 82-005. If not can you let me know what locking part is compatible with part # 82005? Thanks.

If you can please identify this patio door handle part number and possibly if you guys have a replacement. Thanks.

Does the new clamp lock handle come with the latch for the door jamb side?

Not disassembled yet The lock/latch still works but has no 'detent' between locked and unlocked position. Preliminary research into options...cannot find any markings so I may never ID mfr. to find parts. Soon I may have to remove it to measure the mounting hole size, position, etc. Is there anyt ... (cont.)

The lock is broken.

Outside handle has 1540 imprint. Inside handle has Canadian patent no 919213 patented 1973. And patent no 3,596,954?

If there is anything you can tell me about this handle, I would greatly appreciate it. I desperately need to replace it and nothing seems to work. This one is on another sliding glass door. I believe the doors were circa the 1960s?? The townhouse was built in 1967. One last thing, the locking latch ... (cont.)

I'm looking to replace patio door handle. Does not have to be same hardware, would be looking to replace hardware with exact fit. Thanks

This latch has failed and gets stuck in the locked position. Is there a replacement part for the locking mechanism?

Exterior sliding glass door handle - interior and exterior

Hello, I have a Rylock 14999 patio door handle. Do you carry a replacement that has a keyed handle? Thanks, Chris

Hello, I am wondering if there is replacement parts for these.. The unit was built in 1965. Any help would be appreciated. Thanks so much

Hi One of the screws in the sliding door handle snapped and need to find a replacement. The screw is black,philips head, is smooth for about 5/8 of an inch and then the thread starts and measures about 5 and 5/8 inches

Dark bronze tone overall. Panel with screws is brushed stainless or aluminum. The rest of it is some sort of hard plastic. Screws are 5" apart from center to center. No other identifying marks. I am the homeowner who is pretty handy and knowledgeable about most repair work.

Is part #82-005 available in white? I actually only need this part because the other pieces are still fine but I'll be happy to purchase the whole kit if necessary.