Viewing all customer Discussions for:

82-005 Surface Mount Sliding Door Handle Assembly, 4-15/16"

Hi, I am looking for replacement handle latches and base locks for our sliding doors. The locks we currently have are Mitey-Loks. I would be grateful for any recommendations you might have. The issue we have is some of the latches on the handle have broken off. Many thanks in advance, Lucy ... (cont.)

Please identify the International brand patio sliding glass door bottom wheels depicted in the attached photos. Since 5 images is the limit, the remaining images are forthcoming. The handle to the door also needs replacement parts. Can you identify them as well. Thank you for your time and attention ... (cont.)

Do you have these?

If I absolutely must I can use a different size spacing if I drill new holes in the door. However it needs to be bronze color. Dark brown. I need two of them right away. it is not possible to take pictures of it installed in the door currently.

Hello I've got, i guess, a 25 yr-ish old sliding door and I'm looking for a handle replacement . The more centerholes are about 5" apart and the top(outer) ones are about 7" apart. The handle is wood. Any help?

Our patio door has an unusual type of handle/lock mechanism. Lift the handle up, close the door, push it back down, and a lip on the handle overlaps a ridge on the exterior of the side jamb. It's a horrible design. I've had to replace the handle, and I'm constantly having to repair it. As you can s ... (cont.)

Please be advised that We need to have the lock for our patio door located in the basement. Few months ago, in March, I had ordered the bellow mentioned products, however, I was not able to get the correct size when I had order. May you please look at this and advise me. Thank you, The products I ... (cont.)

Sliding glass door handle and door lock assembly .

Hi! Larry Jackson here! Have lived in our house since 1984 - it was built in 1983. Bedroom Patio Door lock has frozen up and just won't work any more. It was held in by plastic clip which has broken. With magnifying glass I saw it was a Reflectolyte product - can you help me? (Picture is below). ... (cont.)

Need to replace patio door handles. screw holes are 4 7\8 inch apart. Door thickness is 1 5\8. Need interior and exterior handles x 3. Ideally bronze or brown in colour as the doors are made of cedar.

Replace the different parts now I want to right one

Space between screws is 6 1/2".

So my handle broke on my sliding patio door and I need to buy a replacement. I went to my local home depot and lowes and they don't have any that fit my door holes. I saw a sticker on the one of the doors (one of the pictures) and looked up some of the numbers and got directed to this website. I was ... (cont.)

Hi, I need a new handle set, lock level and latch grab for my 1973 Arcadia glass patio door. The measurements of the screws is 6" on side and 3 1/2" on end. What do you suggest for a replacement? Thanks, Karen

Do you know where I can find this door handle with lock mechanism?

Hole spacing is 4 15/16". Key is missing for lock. This is a main entry door into house, so a key locking handle is critical! Reverse clamshell locking style. Apparently this style locking handle is discontinued and VERY hard to find. Probably original to the home when built in 1989. Please advise i ... (cont.)

Hello,We just bought a '78 home and the sliding glass door from Reflectollite locks if closed to hard. Fine on the inside, but if we are outside with no key...We'd like to replace it, and I've been told you are the people to help.Thanks for considering this.Jeff

We can't seem to find the attached latch assembly or the broken pot metal piece that's needed. Whichever way it would be available. Hopefully you can help us help our customer. Let me know what more you may need.Don

I have two sets of Arcadia sliding glass doors in my mid-century house in Los Angeles. The latches and handles have broken off. I'd like to replace the hardware--it doesn't need to look exactly like the original, as long as it's functional. Any suggestions?Thank you!Gabe

Please review the handle below and advise a replacement