Viewing all customer Discussions for:

82-020 Mortise Style Handle Set, 3-15/16"

Ok part number 82-263 looks exactly the same as in my pictures so I assume it will work? Will part number 82-020 Work with that mortise lock also? Also I want 82-306 to make it lock. Will all this work together and do you have a kit for all this? Thanks Alan

Wondering if you have a replacement for the attached photos, patio door handle and hardware. The handle is marked with a K K (see photo). The holes are 4 (or probably 3 15/16") on centers. Thank you.

Hi, I am looking for a replacement handle for my sliding door. The only specs I could find were that it is a PPG Herculite KHP sliding glass door. I assume it was put in around the 80's. The numbers I found are 16CFR1201 CII, SGCC 1605 42 02. I can also get you the Ansi number. Please let me kno ... (cont.)

1 - 7/8 inch door. Center to Center on screw hole is 3 - 15/16 Need a replasement locking handle for my sliding door aprox 30 years old

Hello, I'm selling my home and need to fix my patio door lock/handle. There are no serial numbers or manufacturer labels to identify the parts. I took some photos in hope you have something I can use. Thank you.

I need the plastic insert part for my ProShield Sliding Patio door. The handle PN is 172134 I believe. Do you carry the insert or handle?

Attached is my door lock that I need replacement. Please let me know. Thank you.

My locks on all 4 patio sliding doors are broken

Lock control

I need a replacement lock for my patio door. Best guess is the door/lock are original equipment on the home, so about 20 years old. The only marking I see is "DNS" stamped on the side of the lock mechanism. I have included some pictures for reference. Thank you Jim

home built in 1975, Ive tried several handles without success. screw spacing is 3 3/8" as shown in photos. Mortise latch inside with 45 deg keyhole located on lower end of screw spacing. thank you for any help.

Hello, I have Qty 2 doors that I want to replace the handles- one left and one right. Am I able to get two locks with the same key? Canadian Patent No 919213. 1977 or 73 I can't tell Pat No. 3596954 Are these still available? If so, what would the price be and how much for shipping? Th ... (cont.)

I would like to replace this handle with one that locks from the outside. The distance between screws is 5 5/16 (center to center). Please recommend a replacement handle or other solution and cc Aaron in the cc line. Thanks. Bruce

I am looking for replacement locks for two sliding glass doors. I believe they are Weather Shield doors. Sending two pics. Please let me know if you can help.

QUOTE Looking for (22) of these handles in/out with locks Size 9" wood handle holes are 4" apart We have ordered in the past

Back Sliding door handle 7 1/2 inches x 1 1/4 inches 4 inches center to center (btwn screws) * The building plans we have do not identify the manufacturer, but list a model number 6067 sliding door. The actual door frame is starting to crack at the top corner of the handle, weakening it. We are h ... (cont.)

Need a new lockset for my patio door.

Please refer to my attached photos of my 18 year old patio door lock. It is starting to wear out and I need to order a new locking mechanism. Do you make a model that would fit? Please let me know.

Philips SGD handle

I am looking to replace a sliding glass door handle set. I have sent you an image The distance between the screws looks like 4 inches but not sure if it is measured center to center or end to end, since many handles seem to be 3 15/16 perhaps that is the size. The unit is about 25 years old, i ... (cont.)