Viewing all customer Discussions for:

84-001 Spring Tension Screen Door Roller

Very rusted and dysfunctional rollers. As you can see, due to age and rust they came off in pieces. Can you identify a replacement part from these pictures? There are no numbers or identifiers.

I need 2 adjustable bottom rollers for the above mentioned screen. Pics included. The door is nearly 20 years old.

need new rollers for sliding glass door screen

I believe this is Barton Kramer and I want to replace with your SS rollers. The trim I'm not sure if you measurement in fractions or metric so I'll go fractions to get close. Top 1/2" Bottom 3/8" Thickness 5/16" Thank you

Looking for a 34? door bottom for a 1990 vetter swinging patio door. Also need a roller for the same door?s screen.

The metal part that allowed this wheel to stay in the bottom of the door broke off. It's a sliding screen door. The actual door says "The Atrium Door" on the hardware. Not sure if that's an Anderson type (have older Anderson windows). Is this a part i can buy and if so, how much for 2? Might as ... (cont.)

I made a new screen door that's 35" wide by 96" tall. I don't know how much it weighs but it's too heavy for your 84-001. Do you have a roller with a stronger tension?

Hi the lock doesn't work and the rollers are shot and need all new parts. If there is a kit for the whole door let me know. Need parts for screen Door not the glass slider it works fine it's the screen Door that's the problem.

The rollers on my door appear to be 84-107. According to your video for 84-001 which h appears to be the same with smaller wheels after taking out the adjustment screw pull out the old part by grasping the wheel with needle nose pliers. Problem maybe you can help with..what if the wheel breaks off ... (cont.)

The rollers axels fit in a track with holes for the axel extensions. The rollers are plastic but metal would work also if it's the right size-approx 3/4 of an inch.

I need replace tension spring rollers for few sliders. I found some that looked exactly like the product 84-031 however they won't fit due to the depth of the groove which is 3mmThe original wheels have a groove that is 5mm deep. Since these doors use both top and bottom tension rollers the 3mm dept ... (cont.)

I cannot find a manufacturer plate on these doors. They are from a building constructed around 1975. I need four of the upper wheels (with the "W" spring) and four of the lower wheels (JPEG IDs ending in -734 and -923). I think the lower wheels also may have had a straight spring (shown in pictur ... (cont.)

Can you tell me what the 84-001 roller fits into. Is there some sort of receptacle that the "M" section slots into??

Attention Please, Can you please tell me if you all have the adjustment screw (sliding patio door wheel) in the attached photos? The screw I need looks very similar to your 84-502 and 84-506, though the 506 has more thread lines per inch then the one I need. The screw I need appears to be a #8 ... (cont.)

Got a new problem with patio screen doors with outdated hardware, but you have them. Screen Door Bottom Roller, 1" Nylon Concave Product Code: 84-053 is exactly what I am looking for and requiring 8 for two doors I also see there is an adjustment screw recommended and don

I have a Pease Everstrait Patio Door. This Co. is no longer in business. I need the 2 bottom rollerS replaced. I am sending one to you. The top rollerS are metal and seem fine. Can I put metal rollerS on the bottom damaged ones?

I'm looking for a spring tension roller for sliding screen doors like the 84-001. Except I'm looking for a 1" nylon roller with width of a 1/4 of wider. In order for some doors to be installed on sliding glass door tracks. Would you guys have something like this?

Dear Michael, I have an aluminum sliding insect screen that is about eight years old. It has rollers similar to your 88-001 model. Some of the roller wheels are missing. I removed the screws that lock it in from the screen side. I can see and locate the hole in the 88-001, but I can not move the s ... (cont.)

We have two patio screen doors that need the wheels replaced. I believe we currently have a Deltana MSR10 M-Spring Roller (white nylon wheel). Can you advise which of your M-spring rollers would be the best fit. Dimensions of MSR10 are shown in the attached pdf file. Also attached is a photo of our ... (cont.)

Pekin glass & Mirror Co, Part for a customer of ours from their patio screen door Can you help with this