Viewing all customer Discussions for:

17-031 Bracket, #14

I have a spiral balance here. Windows are original, house was built in 1987. Uncertain on brand of window, and uncertain on anything regarding the spiral balance. Has nothing printed on it. It was red tipped. The shoe is in the picture, it is a long thin rectangular shoe. It's 1-3/4" wide. Metal pie ... (cont.)

17 inch length tube and 3/8 inch diameter. White bearing. Spiral type.

Here are three pictures of the balance for my aluminum windows . 3/8 diameter tube , 29 in. Length (SPIRAL TYPE) . Can you send me part no. Price and available.Thanks Dennis

Hello:The balances that I am trying to replace are in a double aluminum window in a rental house. I do not know the age or brand of the window, but I would estimate it to be over 40 years old. The window will not stay in the up position. All four balances need to be replaced. The information that I ... (cont.)

I can't find a replacement spiral window balance with the correct shoe at the bottom. Can you help?

I have very similar windows that need new balances. I was just wondering if the BRACKET, #14 Product Code: 17-031 could be used in the event the old ones are of similar quality as the windows themselves.

this is a new discussion. I was having trouble with the online help form. I have some windows that won't stay open. The balance clips have unique stamped on the bottom of them. The tubes are all 3/8" and the long tubes measure 30" the short tubes measure 18". Ill need 8 of each if you can help m ... (cont.)

Did not know if I bought the right parts<

I need to replace two spiral balances in a non-tilting aluminum window about 14 years old. I have identified the part needed as S400-30 red. bracket I hope you can help me with how to remove the old rusted bracket to install new ones #17-031

Hello, I purchased 20 springs (S400-34) and 20 brackets (17-043) a few weeks ago and am now trying to install them. Unfortunately, the brackets are not compatible with the springs. The picture of the bracket shows several measurements... but didn't show the measurement of the depth of the throa ... (cont.)

Hello, Trying to find replacement for several 25"long, 3/8" diameter with mounting clips window balances. The track is 3/4" deep and 1" wide. Attached are photos. Thanks

I need to replace two spiral balances in a non-tilting aluminum window about 20 years old. I have identified the part needed as S400-30 green. However one of the lower brackets is broken, half of it fell out of channel during my investigation. I see that you sell brackets but they don't seem to ... (cont.)

18 inch 3/8

Hi, can you help me with the correct replacement parts? I need 23"x 3/8 SPIRAL BALANCE and attachment peace. I will need a total of 4 of them. Thank you.

At least 30year old sliding window. 25 inches long 3/8 diameter

I wanted to know if you had any parts for my window. Its from the 1950s. Id like to restore rather than replace.The coils are a disaster and i can't open or shut the windows very easily. I think the black plastic balancers are broken also. It takes 2 different types. On one side there are 2 long bl ... (cont.)

I have to replace some non-tilt balances, and I'm not sure what I need to order. The balance I took out of our window measures 36.5" and 3/8". It has a red tip. Also, on some of our windows, the metal piece on the actual moving window that connects to the bottom of the balance is broken. The ... (cont.)

I have spiral balances in my home. They match your s400 series of spiral balances, but I don't know what clips to use for the bottom.

I have a windows that has a broken spiral balance (Bracket/bottom clip broken). I attached a pic of the ends. The dia is 3/8, length 30. Color looks green. I need to know what I need to order and how to replace (reattach) the bottom clip? It looks like it is screwed to the inside side of the wind ... (cont.)

I need replacement retrofit spiral balances but do not see in your site an attachment that would work. My windows are ADL trimline windows