Viewing all customer Discussions for:

S351-29 29" Series 351 Channel Balance

Good evening, I have a 29 inch length tube, not counting the end parts. Please advise as to the correct parts to order. Pictures are enclosed.

these windows use 1/2" balances 29" Series 351 Channel Balance S351-29 The cap is on window glass frame top corners and it pushes down on the balance once the new balance and glass in place

I want to make sure I'm getting the right balances with the correct plastic end parts.the stamp number 2850 is obvious and the length is 29", but if you could please varify the end parts so I can order the correct ones-that would be appreciated.thanks for your time.Jack

I'm not sure which channel balance series to chose. The number on my channel balance is 2830x. Which channel balance do I need?

The window channels to be replaced are marked 2830, 29 inch aluminum. I'm not sure of the balance shoe sets needed, and want to make sure I order the correct ones. Any help would be appreciated

The metal Chanel measures 29 inches. the metal is stamped 2830. I have seen several of theses online although some of the plastic parts are different and vary.How do I get the correct ones? or do I just order a 2830 and it will come with the correct plastic parts? Any help would be great. Thanks Car ... (cont.)

Hello, Needing to purchase 4 replacement balances. They are 29" long. I think I need the S380 with the 2830 stamp, but the bottom boot on mine don't have the outside retaining clips. Wanted to confirm they were the correct ones before purchasing. Thank you very much!! Michael

Looking for the name of this part from a Jordan window and what other part might be needed along the one pictured to make the repairs. Numbers on the part are 2830

Need 2 (left and right) of this part - measures 30" from outermost point on plastic pieces end to end. There is a number stamped on it: 2820B (the B is backwards when reading the number correctly). Last repair needed before closing on a home. Thank you

The house was built on 1985, the windows on the picture, the springs have some # 16 CP and other is 28 CP

Hi: my windows weight is 22 lbs Balance width is 1/2" length balance (metal) 29" Can you said me which one is good for me Thanks, Carlos

Hello, I would like to replace the balance for the windows, but need to know the right one. Attached are some photos of one to be replaced which I believe measures 29-ins in length and 1/2-in in width. Thank you for your assistance.

Hello - My broken channel balance is inscribed with BSL 28300 (but the last zero looks like a backwards D). I suspect your comparable replacement part is Series 380 Channel Balances 1/2" x 29". Can you confirm? Thanks, Darec

I think I need a Series 351 29 inch Option 2830. They are coming off a Jordan Window, Could you please verify so I can order a pair.

I ordered some window balances several days a ago. I need 20 the balance catches that on the upper corners of the windows.

Looking to repair one window at our rental house with a new channel balancer for a Gapco window probably install in the mid 80's. Want to make sure which one to order. #2830 on the side of it

Trying to determine which part to buy. Stamp says 2830

Need two full set sashes to replace rusted out/broken ones. Photos attached. Please email if more info needed and price.

I need new sash guides. I think the 18-166 sash guide is correct, but I don't know how to identify the correct channel balance. The balance is 29 inches long and 1/2 inch wide. It does not have a winged base to top, so I think the Series 351 is what I need. The numbers stamped on the side are 28 ... (cont.)

Hello. I need to identify these window balances. They are 28.75" long (end of metal to end of metal) and seem to be just over 1/2" wide. There are some numbers stamped in the side of the balance but I don't know if they mean anything. Thanks for you help!