Viewing all customer Discussions for:

S351-29 29" Series 351 Channel Balance

I ordered some window balances several days a ago. I need 20 the balance catches that on the upper corners of the windows.

Looking to repair one window at our rental house with a new channel balancer for a Gapco window probably install in the mid 80's. Want to make sure which one to order. #2830 on the side of it

Trying to determine which part to buy. Stamp says 2830

Need two full set sashes to replace rusted out/broken ones. Photos attached. Please email if more info needed and price.

I need new sash guides. I think the 18-166 sash guide is correct, but I don't know how to identify the correct channel balance. The balance is 29 inches long and 1/2 inch wide. It does not have a winged base to top, so I think the Series 351 is what I need. The numbers stamped on the side are 28 ... (cont.)

Hello. I need to identify these window balances. They are 28.75" long (end of metal to end of metal) and seem to be just over 1/2" wide. There are some numbers stamped in the side of the balance but I don't know if they mean anything. Thanks for you help!

Hi - one of my Jordan windows no longer slides correctly as the balance on the left no longer works (the heavy-duty white fiber cord that wraps around the 2 pulleys failed). This is not a "tilt-out" window I followed your very helpful YouTube video and easily removed the window and both balances. ... (cont.)

I need to know which window balance to order

balance is 29" long and 1/2" wide #on balance 282088081p balance is 29" long and 1/2 " wide # on balance 282088081Q

2820 29in. Balances, can you tell me what series I need.

There are no stamped letters on the parts. There is printed information which is "28 4 FP CALDWELL" I find no other identifying information. The window weighs 24 lbs.

Circa 1984 storm windows no markings to provide. The smooth metal pin is a cheap fix of years ago which is a nail. A plastic/nylon pivot should be where the nail is. The screw goes into a smaller channel shown in top view which holds corner together. The frame channel seems to be 7/32 inch. ... (cont.)

Channel is 29 inches long and 1/2 inch wide. Please help as there is no number on it

These are from the same window but are marked as 2220 and 2320. One appears to be a little longer than the other, but they are not perfectly straight now.

This is a 29" long spring lift. 29" is the length of the metal part only. Metal part dimensions are approximately 5/8" square.

I am looking to replace the channel balance in my windows. The window is a non-tilt with fixed panel at the top. The sticker reads as follows: Series 2312 AAMA/NWWDA 101/I.S. 2-97 H-LC50 48x84 How do I located my replacement part? Thanks Gary

Please identify the correct upper sash guide for my windows in order for me to purchase replacement parts. I have been ordering the S351-29: 29" Series 351 Channel Balances for the same windows. Thank you- Bob

I would like to purchase a 2 complete Channel Balances: Part #2830, 29 inches long. I need 1 set of two. Thank You

28-13/16" long. #1 in position. #2 bottom. #3 top.

Please help me determine the correct part to order. Attached are some images. Can someone help me figure out which part to buy?Thanks