Viewing all customer Discussions for:

19-002 Channel Balance Top Guide

Need replacement balance 24" options stamp 2420

I am looking for a 31 1/2 Caldwell balancer

Number stamped on white part is 25 B and then Fiberlux. Also is there a diagram that shows how to reassemble. The parts were loose in window and I don't want to remove other windows for fear something will break. Thank you.

Could you provide the item numbers for the bottoms and tops for the Yale-Ogron channel balance ends?

I need the S350 balance, but with a different shoe. I need the shoe with outward pointing wings, but the depth is 1" even. You show a shoe with a 1-3/32" shoe on the Series 350. Can you make it with the smaller shoe?

Please help identify and by two of these. I know they are 1/2 inch wide and 28 inches long. But the ends did not match any on your web site.

Hello, I'm looking for the item in subject line, but could not locate in your catalog. The number on my channel balance is 283 88081P (very old windows). I located a very similar balance top in your catalog, # 19-002, but quite a direct match. Hopefully you can assist. Thank you, ... (cont.)

I have several windows with broken sash parts. When looking at the windows Channel balance look too long. The balance top part appears to be 19-002. The bottom 15-001. The rail is marked 2140 and is 22" long. The window is 22-3/4 high so I think the channel balance is too long. The window weig ... (cont.)

Hey There, There are 3 things maybe you can help me with: 1-2: need to replace 4 balancers for two different size windows: 1st Window: C31 32inches long needs the plastic ends 2nd window: 3530_BSI 36inches long needs the plastic ends And 3: the window with 31C balancers h

I am trying to replace the balances on two windows. They have some faint markings that say "24-3 68(?) Caldwell". They are 5/8" deep and just slightly more than 5/8" channel width (11/16"?).

This is a #2630 balance rod from a Clearview window. The company is out of business. The windows were installed around 1979. Looking at your website I think the series #351 with the top and bottoms 19-002 and 15-002 will work. Might not be a perfect match but close.

Need top plastic part #. Does it come with rivet?

Top of channel guide has a notch in the middle close to 19-002 top & 15-002 shoe, could find one with a notch, that apparently catches on a yale stop at 4" from top of frame didn't know how t make this picture smaller? house buitd in the mid 70'S Please let me know for sure.

28" channel balance number on unit 2720.

The balance measures 21 5/8 long as depicted on your website

Hello, I have to replace some balances for Quakers windows. After reading your helpful descriptions on parts identifications I continue to question the correct top which I believe to be the 19002 and shoe which I believe to be the 15-002. I have enclosed a photo of the typical balance. The bala ... (cont.)

I need to replace the entire channel balance. I believe The top is a 19-002 but it seems the shoe may be a 15-003 since it seems to measure 1 3/16". I do not see complete a channel balance with a 19-002 and 15-003. I only see Series 351 which comes with a 15-002 shoe and Series 390 which comes ... (cont.)

Hi, The mark on hardware is 27 4 FN Caldwell. I need to purchase two replacement parts. Please help me find the right part number. Thanks Hui

To whom it may concern: I am including pictures of the hardware needed for my single-hung Nuair windows. I am hoping that, from the pictures, you can determine what is the proper window balances. The windows are a 900 series MST 4565, and were installed in the house in 1992. Please let me know if ... (cont.)

Could you please identify this model number