Viewing all customer Discussions for:

S380-21 21" Series 380 Channel Balance

Metal portion is 21 inches long and 1/2 wide. This is a pass thru window from the kitchen to the patio that blew out during hurricane Milton. The sash blew into the kitchen, was not damaged and the channel balances came with it. The home was built in 1989 and I don't know the window manufacturer. I ... (cont.)

Need to buy 2 replacement balancers. Existing ones marked with 20 3 JV CMC 7.

3795 : width 7/8" 3796 : height 1" 3797 : height 5/8" 3798 : total length 21"(for metal part only) Stamp says : 20-4 DS CALDWELL

Number on part is 20-4 FA5 CMC 9, it looks to be 3/8 wide and 21 inches long.

Please help to identify what part number I would use to replace the attached pictured balancers? Thanks, Jim

I need to replace the balances for a sash window - see photos. I think I need: 21" Series 385 Channel Balance, Product Code: S385-21, but I'm not sure about what weight I should get. When I place a scale between the sash and bottom without the balances in place I get reading between 15lb and 25lb, ... (cont.)

20 9 GR Caldwell, printed on side Let me know if you carry this. Need 2 of them Thank you,

Could you please help me identify the top sash guide, the channel balance ( which I believe is 21 inch in length) needed to replace the window parts? Also, could you please provide me with the cost of each item and the shipping cost? The items to be shipped are to Surrey, B.C. Canada. Thanks,Nelly. ... (cont.)

I require two (2) channel balance. Metal part is 21 inches. Photos attached.

Looking to replace channel balances in several of my windows. Stamp is 20 4 CL Caldwell. Metal measures 21 inches. Plastic ends both have wings. Channel depth is 5/8' and width is 1/2". I believe I know what I need (21" Series 380 Channel Balance, S380-21) but would like to be sure before orde ... (cont.)

Need to replace balancers on our sliding windows. These are 21 inches long, 9/16 inches deep and 1/2 inch wide. The marking on the balancer says 2040D BSI.

I need a pair of balancers for my window. I attached photos of the part as taken from two sides, as well as a picture of each of the ends. The metal channel is 21 inches long. Thank you for your help! Mark

Hello, I'm looking to replace this window channel balance for a single hung window. Could you please help me with part#? Thank you.

The length is 21" the number reads 2030 which I can find on amazon but holes do not matchI need four, any help will be appreciated - thank you Miguel

Hello, I am unable to find a part with the same number stamped as the one I pulled from my window- 2090S. Could you advise me a suitable replacement? Thank you!

Length (excluding the white plastic) - 21" Please let me know the part, I would like to get the channel balancer (3 Quantity). Can you please let me know the exact part number?

I'm looking for the following parts. Thank you, 20 4 AS CALDWELL Metal part is 21" long by 5/8" on open side and 1/2" on closed side. # 18-188 5/8" top saah guide

Need to source 2 sash balances to replace exiting ones that the string has come apart. The markings on the balance are 20-3 JX CMC 11. I have included some photos as well of the end caps, spring, and dimensions of the channel. The overall length of the balance is 21" not counting the plastic ends. ... (cont.)

I need to replace my 20 4 Caldwell KL window balance. Do you know which product I need based off of this info?

Hi there I am In need of a 1 window channel balance ! And Someone to install it I live In Huntington Beach, California 92649 ! If you know of any body that would install 1 balance for 1 window ? The marking on the balance (20 4 JQ CALDWELL)