Viewing all customer Discussions for:

S380-30 30" Series 380 Channel Balance

Part #2930 stamped on housing.

Balance Channel(s) only stamped 2920

Hi I need a price and order new Side load window channel balancers for one window. That's two parts. The number on the window balancer is 2950. Please let me know if you can help me. Joan

Hi, I have 9 windows that I would like to replace the balances and Sash Guides. Most do not work from lack of use and the sash Guides break when I do get the windows open. There are 5 pictures here, I will send 5 more in another email.. The windows are (7) 35 x 60 and (2) 50 x 60. They appear to hav ... (cont.)

Need to replace both balances for my window. The old balances have the following code printed on the balance "29 3 CX CMC 7". Any help would be appreciated

I have 2 windows I need replacement parts for in my home. I have attached a picture of the label and window in the dining room that I need the sash guide on each side, the plastic pieces and the metal clips. Could you provide these parts?

30" long 1/2 wide channel stamped 2920

5/8x5/8x30 channel. No markings

30 inches

I need 4. See attached photos. 1/2 inch channel overall length is 31 1/16 tip to tip of the plastic ends. Stamped "s 2910"

30" metal to metal/height 5/16"/width 1/2" Thank you for your assistance.

28.5 ES CALDWELL 29.4 NH BSI 21-9 BPS CMC 43

I need to replace some channel balances on some Milgard nontilting windows. Channel is 1/2 inch wide and 30 inches in length.

Stamped with "29 3 B.S.I 0L". The 'B.S.I' Is perpendicular to the rest of the characters. I believe the windows are from a company called Pacific Window Corporation that no longer exists. I have several windows that are not working properly. They're different sizes, & probably have a small variet ... (cont.)

Three different window sizes. Each needs 2 channels. 1. 28" long stamped 27 4 D BSI 2. 30" long stamped 29 9 PG BSI 3. 26" long stamped 25 9 PG BSI My guess is that I need the 380 series. 1/2" width. The winged shoe would be 15-005. My measurement of the depth of the sho

Hi, the cord is broken on the other unit. If you can identity I would greatly appreciate any relevant information. It measures 30 inches. There is also a plastic adjustment screw on the bottom. Thank You, Patrick

Hello, see attached photos. I am looking for a replacement. Depth ~0.5". Length of channel 30". Thank you for the help :).

I would like to know which replacement part I need.

Dear Swisco, Please help identify channel balance in the attached photos. The metal frame is 30 in long. Thanks, Kevin

I have 11 windows of several different sizes. The all are the same style. From looking at your website I think they are style 385. The metal channels are 1/2 inch. The shoe part is 1 3/32 inch deep. I am sending pictures to make sure I order the correct ones. The metal channels all are stamped ... (cont.)