Viewing all customer Discussions for:

S380-31 31" Series 380 Channel Balance

Hi; If I order the next higher option (3050 instead of 3040) in two balances, will it make it easier to open the window? Thanks

I accidentally ordered the wrong part I am shipping it back today but this is the part that I am looking for please let me know if you need any further information

I need to replace 2 channel balances in a window where they were none. They are the S380 style. Weight of window is 11 lbs. Channel is 1/2 in. The actual window is 33 1/4 wide and 30 1/2 high. the cutout is 57 in high and 57 in wide. I have recently replaced several of these in the hast few we ... (cont.)

Hi Swisco, Happy holidays! I'm in need of help identifying these windows balances. The window doesnt stay open but i was able to remove the sash to access the 4(2 per side) balances which were all broken. The sash was quite heavy and I think thats why it needed 4? I've attached images of the top a ... (cont.)

Tracks to make windows function. Pair of 3006 Pair of 2950

Need a replacement

This looks like either our S380-31 or S385-31. The difference between these two channel balances is the depth of the bottom nylon shoe, or the 'heel-to-toe' measurement. The picture below shows this in further detail. In either case, you will need a stamp option of 3030. Let me know if you have furt ... (cont.)

31

the chanel balance is 31" long a d the part number is: 30 3 BSI og

I have a Caldwell channel balance marked 30 3 BN Caldwell. I don?t seem to be able to find a match on your site. Mind has 19-005 top. And 15-029 bottom. 31 in length. Wings are 15/16 in wide. Bottom shoe is 7/8 in depth Please advise. I would need 6.

need help identifying the balance tops and bottoms needed. Thanks for your help

This is a 31" long channel balance (metal part) and 1/2" wide. Thank you.

We bought a 10 yo house about 2 years ago. We have numerous single hung windows and almost all are very hard to open or close. We had a balancer break on one and had a local window company replace the balancers on that window. It is much easier to open and close now. I decided to try to change t ... (cont.)

Hi Swisco team, I need help finding this part. I need the complete window balance so it's ready to install. The total length is 31 inches. Width is 9/16" and height is 11/16". Please see pictures I need 6 of them. There is a stamping that says "30 3BSI" on one of the pictures. Thank you. ... (cont.)

Most of the parts for this model match my original with exception to the toe. The picture shows the difference between the 2 pieces. S385-31 doesn't seem to be an option. How do I get the same toe on the NEW part as my original?

Hello, I need assistance identifying the correct replacement counter balance. I will nee 10 of them after I have successfully identified them. Please let me know if you need further info. On the side of one of the counter balances is says "30 3 cn caldwell" Thanks, Joel

need to ID window sash clips and snap in glazing. Using S380-37 balances.Are shorter balances (31")with marking of 30 3 BO Caldwell same as S380-31?

It sure appears we need an S380-31 Series 380 For the weight ? the stamp on the side of our existing Caldwell block and tackle balance is "30 3 GK Caldwell." Does this mean we need a 3030?

I'm not sure which stamp option I should choose. I'm pretty sure I need the 27" S380. The only stamp I could see was 3030. The windows are double pane and weigh 18lbs ea. I have four of them and all are difficult to open and harder to close.Thanks.Terry

Dear, I think "31" SERIES 380 CHANNEL BALANCE" or your website of this link https://www.swisco.com/31-inch/pd/Series-380-Channel-Balances/S380-31 looks matching to my one. However, not sure the stamp option. My window is Milgard Vinyl window. Can you help me to find the right parts? Thanks, DJ ... (cont.)