Viewing all customer Discussions for:

S380-33 33" Series 380 Channel Balance

I'm looking to purchase 4 channel balancers for milgard windows. The channel has an ink stamp. 32 4 JU CMC 7. Would like PN so I can order replacements. The one channel end has a 1" lobe so should be a series 380.

H-C40-56X91 / H-C40-54 X 90 Series:5220/5231/5270 P.L# 032-138 CONFORMS TO: CMBSO Both balances are missing the clips to hold to the frame. what kind product should I order? and how long will it take to receive the delivery? Thank you.

22 3 Caldwell 23 inches on the metal.

Hi, I am looking for a pair of these useful creatures. Please let me know what I should buy. Kindly, Johnny

Dear Swisco team,As shown in the attached photo, the spring doesn't move along when raise the window. I believe I should replace channel balancesPlease see below and let me know if you have any questions 1. length of the metal channel without nylon is 81.5cm ( 32.08 inchese) 2. It seems like the cl ... (cont.)

I need two window balances. 33" long (metal to metal) Plastic "wings" on both ends. Marked 3240. 1/2 x 5/8" ? I have photos of plastic ends. Window is 33 3/4" wide x 35 3/4" tall and wieghs 22 pounds. Non Tilt type. Thank you

Hi, I need about 1 pair of 26 4 EW CMC 10 and 1 pair of 32 5 DW CMC 10.Thanks and regards,Manish

I need two balance channels. The channel length is 33 inches. The information on it says 3230 BCI. I have included photos of the ends.

This was installed in the left channel of a top to bottom sliding window. Some markings on it "32 5 KV CMC 2". Thanks33 inches in length

These are non-tilt windows with channel balances. Window weight is 20 pounds. Mental ONLY length is 33 inches. Pictures attached. Please advise if you need any additional information. Six windows are involved. It would seem prudent to replace all (12) balances as the home is 22 years old and t ... (cont.)

Hi, I'm looking to replace my broken window balancer and want to make sure I buy the correct part. I attached photos, could someone please help me with which balancer I need to buy for my home ?

I am wondering if the tongue on the one I have is important? But also wondering if these cams are designed to work with a specific channel balance? I have a 3240 or 32-4 33"x1/2". I think it is your balance, would other pictures help? Also, the plastic part is very close, but it is missing what appe ... (cont.)

Need balancers for a 22 year old Series 6200 Millard non-tilt window - stamp is in picture - it measures almost 33" metal channel only Thanks!

Hope you can get me the correct part. Thanks

hi i need 2 channel balance for my window i have stamp on the old channel balance it is 32 4 lv cmc 2

Hi. The window balances are 33" long at the metal. 3230 is etched at one end. Look familiar? Thank you. Dan

What channel do I need for my sliding window? Thank you

Hello, I have two sizes to identify. 1. Caldwell 32 5 DN 33" long (metal only) 2. Caldwell 17 3 BN 18" long (metal only) Both sizes have identical foot and hook.

Hello-I would like to order two replacement channel balances for my Milgard single hung window. The markings on the existing balance is as follows:32 5 CU CMC 2 (see photo)The length of the metal portion of the balance is 33 inches. One of two channel balances has failed and I would like to purc ... (cont.)

Mid 90's Milgards- metal is 33' and 1/2' wide if we are sure of the ID....please send 2!