Viewing all customer Discussions for:

21-007 Bifold Door Guide Pin

I'm looking for track and the name of the part the bifold door pin sits in. The female portion that sits in the track.

I own several condos in a condo complex that all have metal bi-fold closet doors. Many of the guide rods are missing at the top and bottom. I'd like to replace all the ones that are missing and purchase a few more to keep if anymore should go missing. I'm not sure which rods for either the top or bo ... (cont.)

I just bought a house and all the bi-fold closet doors have these clips holding the pins in place. I found part # 21-154 and they look like they would work. Do you think they will?

Hello, The house was built in 1963 and still has alot of these original, metal, bi-fold doors. Some of these pins are damaged and need to be replaced. All 3 are about 5 3/16" inches long and 1/4" thickThanks,Robert

Looking for 3/8 ID nylon bushings for 3/8 OD pins for top of door to guide door in track

Hello, I am looking for replacement parts for closet doors which I had to remove for a construction project. I would prefer if there is an easier pin to use than the ones I have in the pictures. Also there is a stopping block in the bottom rail that is missing and I would like to replace it and th ... (cont.)

Hello Do you have replacement hardware for this bifold door? It's super old, date on back says 1971. Neither door set had a complete set of hardware on it. They're in an old mobile home. Hoping you could help with the upper and lower pin replacements. Also not sure the tracks have the pieces they'r ... (cont.)

I am trying to replace the broken pieces for a 90 inch metal bifolding door. Can you give me some advice as to what replacement parts I need to purchase?

I need replacement floor tracks for my 1969 fold away bifold metal closet doors - still available? Do you sell a kit to refurbish the door and all the hardware?

I have two 1994 metal closet doors Slimfold E that need new hardware and one upper track. Please help me order the parts. Julie

One of our doors needs the plastic/ neoprene pin covers. The doors were installed in our house when it was built in the early 1970's. I've attached a picture of a sticker found on the inside of one of the doors. This is the only identifying information on the doors. Do you sell replacement plast ... (cont.)

Please, I am seeking assistance with completing the hardware for 6 x 24" bifold panel for 3 x 48" closet. I picked up these used doors from a yard sale and would like to install them. I am primarily missing the 3x upper tracks and 6 x pivot/jam bracket (and associated pins). Some of the hardware in ... (cont.)

Thanks

Hi, I have 5 pairs of bifold metal closet doors in my 1972 house that I would like to spruce up. The tracts for the sets are 71" , 59" , and 47" (x3) in length. I'm wondering: (1) do you carry replacement tracts of this style and in these lengths, or something similar? (2) do you carry replacemen ... (cont.)

Need 3

I need two of them the inside of the track measures 1/2" wide while the outside edges measure 3/4"the clips fit inside the track and then rest on the edges as seen in the photos

I sent an email inquiry earlier this morning. Attached are two photos that I took of the top and bottom ends of the bi-fold door set, without the hardware in place. Can you discern whether your hardware will fit on these doors, please? I would much prefer to make these doors work, rather than buyin ... (cont.)

Hi, I have three 1970s metal bifold closet doors that I'm hoping to find replacement parts for. I removed the doors to have my floors replaced and many of the parts have been broken or misplaced. I'm hoping to find replacement pins, brackets, clamps, bumpers, tracks, and anything else needed to com ... (cont.)

5/16 not big enough, need next size up

I need a replacement pivot or a replacement track.3 ft track 2 very heavy MDF Doors or a replacement track that is 36 inch long, 2 inch tall and can support 2 heavy MDF bi fold closet doors .