Viewing all customer Discussions for:

21-007 Bifold Door Guide Pin

No markings

Hi, My house flooded so I can't show you a picture of the bottom metal track that I need for my original 1980 interior bifold mirror closet doors. I have attached a picture of the label on one of the doors for your reference. I have two closets, each with a pair of bifold doors. Each pair measure ... (cont.)

Hi experts: Need to replace top and bottom tracks for bifold on 2 closets. One set is 71" and the other set is 60" Thanks for your help!

Swisco Experts I Need Help - 8 - Flat head screw clamps 3 - Bottom pins Thanks for your help! Any different combinations of options to make it work would also be appreciated

this is shown as an alternative, and how can you get them with the spring, to use in replacing spring loaded pins?

I am looking to replace the tracks, pins, and all other hardware for all the closet doors in the house my wife and I just purchased. The house was built in 1958 and has the original closet doors, and we expect the original mechanisms. I have had a really hard time identifying and finding the parts t ... (cont.)

Do you folks have these? (Metal bi-fold closet doors)

Can you please identify the top pin assembly for our closet doors?

Looking to replace the hardware and tracks to the bifold doors at our new house. All of the tags are worn out so I can't find any information. Any help would be great. Thanks!

I'm in need of a 5" bifold door track that can accommodate a 3/8 pivot and guide. I looked at 21-402 but it's not saying in the product description that it will accommodate a 3/8 pivot.

I have an old closet with two, bi-fold doors that span 7 feet total. I'm having constant problems and they just don't move very easily. The top track looks fine but the bottom track seems to have old paint in it. I'm hoping new hardware will fix the problem without replacing the bottom track. W ... (cont.)

Looking for parts for these awesome doors. I need guide and pivot pins or caps plus the springs. Please let me know what's available. Thanks

Hello I need 1x of the unit on the left (small fix element) and 3x units of the set on the right (16 cm length, 6mm metal rod diameter & 9,5mm diameter for the plastic part on top- upper part). I am really glad I found your service with the supplies I need. Please let me know in case you need any ... (cont.)

I need four to six sets of double bifold door hardware for approx. 1970's Float Away budget bifold doors.

looking for replacement parts

Greetings.. I have two metal bifold doors that are hurting.. the start of the issue is that the wood tracks are fully worn and the pins will not slide. Yes wood, there was no metal in the track. House built in the 70's. Both are 6" wide, 7' 4" tall. Half of the hardware is swapped out for simple bol ... (cont.)

We have two closets with metal bifold doors and I am THRILLED to finally be able to fix them. I need new tracks and new pins all around. Attached is a photo of the top pin on one door. Can you help me figure out what I need? Thank you!

I have three metal bifold doors that I would like to reinstall. One door goes in a 36" wide opening and two go into a 72" wide opening. I am looking to purchase the upper tracks and associated pivot mounts, and the lower floor mounted brackets. I do not believe that there was a lower track. If ... (cont.)

I recently purchased a rebuild kit for ~1980s mirrored closet doors. I cannot get the pins to stay in the pin caps as the pins pull out when opening/closing the doors. I reversed the spring tension on the doors(top: push up vs pull down to engage pin) and the pins still will not seat in the cap. ... (cont.)

Dear Sir,We are doing renovation on multiple apartments with older metal bi-fold doors. The hardware for most of the doors needs to be replaced. I have attached pictures of one set of doors and the existing hardware. I do realize that most of the nylon bushings are missing and the pin in picture #14 ... (cont.)