Viewing all customer Discussions for:

21-044 Bifold Door Top Pivot and Guide Pin, Benchmark

I have four Benchmark Steel Bi-fold doors that are 92"+ tall and 40 years old and I can't find replacements. They aren't in bad shape, so I have painted, but thought I should replace the hardware since they don't slide very smoothly (or quietly). I was going to order (3) 21-044 & (1) 21-002 per do ... (cont.)

I have a 5 ft opening with metal bifold doors. I am missing the track and the support bracket that mounts to the floor on each side of opening.

Im looking for replacements for these pieles. Thank you.

I need to replace the hardware for my Benchmark bi-fold closet door. I can't seem to find a part number on the closet door. Can someone please help me find the hardware kit? Left side door dimensions 23.5 L x 79 H.

Ihave the exact same doors. Here are some images of the guides and doors. The metal pins are 3/16" I am missing the glides and white caps and a couple of spring stops. I don't have a clue what they originally came with and how they should work, but would appreciate any input and suggestions for mak ... (cont.)

I need assistance identifying the parts needed for this metal bi fold door. Unfortunately, we do not know the brand of door. Any input would be appreciated. Thanks.

I received bottom track for my metal bifold door, 21-401. Note 2 photos. I think you refer to the pieces as floater and pivot ? Your track is less wide as my old one. My floater piece (under the spring) is wider than the opening on the track and does not go in.I want to order the 2 parts (floate ... (cont.)

Hi! I need your help identifying which parts I need. I have three set of these doors. One on 36 inch tracks and two on 59 inch tracks. I would like to recondition these doors so they open and close nicely. Somebody at swisco showed me the 21-044. The the closest if not the se vracket would ... (cont.)

I am retired woman and will have a handyman do work if parts are still available. The door is 36 inch wide. There are four of these doors in the home. This one is in disrepair. The actual doors are in good shape. I would like to replace all of the other parts. I believe there also should be some typ ... (cont.)

I need top and bottom hardware. All parts pin,spring etc. Please help!

Have a questions about the installation clip on part 21-044. Does that clip fit between the spring and the bottom of the metal frame or does it sit on top of the pivot pin? If it clips on top of the pin, should it be flush with the metal frame or above it. Trying to figure out exactly what that c ... (cont.)

Hello The top corner bolt securing door to track is gone. Can you advise what replacement part is needed. Benchmark sticker of brand above

I have two metal bi fold doors that I need all new hardware for. Do you carry? Benchmark doors.

Hello: I need help identifying new hardware for my bifold doors. I need as well new tracks. The old tracks measure 30 inches per one bifold door (4 tracks top and bottom) and 2 feet per bifold doors (4 tracks top and bottom) Thank you for taking the time to help me.

Need pin replacement

I have been desperately searching for compatible replacement hardware for my rental units existing metal bifold doors to no avail. The doors are in great condition and functioning perfectly, but the hardware has deteriorated. Neither the doors nor hardware have any identifiable markings/brand names ... (cont.)

no names, numbers or markings available.

I am looking for a replacement part (attached pic) for a bifold door. In your website it appears to be part 21-044 with the exception of the length. Our part is 4.25". Perhaps the length doesn't matter and it can be longer. My Mom thought she placed an order for these last July and we did out it o ... (cont.)

My PostBenchmark Steel Bifold Door came off the track. The doors are louvred from top to bottom. Need both posts to repair. One came completely off; the other is badly bent. The doors were installed in 1985. The one post looks like the 21-044. Your help is needed to get the correct parts and to ge ... (cont.)

I am trying to source parts for this Benchmark steel bi-fold door. Can you assist --it is installed on a track. will need the parts to hold it in place and open and close smoothly. thanks