Viewing all customer Discussions for:

21-050 Bifold Door Guide Pin

Hi! I have a full vu bifold door that I can’t seem to get back on track. The door isn’t sitting high enough so it drags on the bottom and I can’t seem to things aligned. What parts might you recommend to help get this working again?

We want 2 complete replacement part kits for both top & bottom of mirror door hardware please. Residential homeowner. Thank you.

Hi, I need a pin assembly for a metal bi fold door. I took pictures of the companion door that has the pin installed. I included a measuring tape in the photo. I do not know the name of the door manufacturer. There are no identifying marks on the door.

The track is approximately 3cm wide, the pins that go into the track have slides at stationary pins and rollers at doors that open. Some of the rollers are missing.

These are what I think to be Leigh 70's era bifolds- looking to find similar parts and tracks for identical bifolds in another room (for a 10' opening) which were completely uninstalled and are missing all hardware, including original tracks

Hi, sorry I don't have better pucs at the moment. I was hoping you might be able to ID the door from these lower guide pin pics and provide a parts list for all the hardware. Or maybe point me in the right direction for how to ID them, I couldn't find a brand or anything. My parents and several of ... (cont.)

My dad custom built these mirrored bifold closet doors in the early-mid 80s. I thought I repaired them but if I'm being honest, it was probably a temporary fix. It seems like the tracks (bottom/top) themselves are probably fine. However, I could see a new bumper-- at least on the bottom track and d ... (cont.)

We have multiple of these Leigh metal bi-fold closet doors that are missing the metal pins and plastic guides/sliders that go into the metal track. Aside for the missing parts the doors are functional. We are hoping to purchase replacement parts. Any/all assistance would be appreciated. ... (cont.)

These are pictures my contractor sent me. He doesn't know the manufacturer of the door. Can you tell? What parts would I need to replace the existing hardware?

I'm looking for the bottom pivot rod for this bifold door or suggestions for alternative fixes.

I recently purchased a rebuild kit for ~1980s mirrored closet doors. I cannot get the pins to stay in the pin caps as the pins pull out when opening/closing the doors. I reversed the spring tension on the doors(top: push up vs pull down to engage pin) and the pins still will not seat in the cap. ... (cont.)

Hello, Need replacement plastic sliders for top and bottom rails. The pin is 5 1/4 inch long, 1/4 inch wide. I would also appreciate receiving information about a full set of replacement parts (top and bottom). No idea who manufacturer was. Thank you in advance.

Need replacement bottom pins and a couple plastic sliders for the bottom rails. Pic1 shows top pivot pin (which I have all of), pic 2 shows bottom of a door, pic 3 shows the one bottom pin and the plastic slider that it snaps into. The rail is at (or just over) 7/16ths inch wide. The pin is 5 1/4 ... (cont.)

hello I'd like to refresh tired 50 years old metal bi-folds. Could you help me identify the parts shown in the attached pictures? Pictures are top left, top right, bottom right and left. I'd like to replace top and bottom tracks as well. thank you

I need the top stationaries abd bottom and top pivits.

I have two sets of metal bifold doors that are old and don't work well. They don't stay in their nylon clips, are hard to open and shut, etc. I think the tracks are still okay, so I want to get all new pins, springs, nuts, and nylon clips for top and bottom rails (I assume you can replace those by r ... (cont.)

I've inherited some metal mirrored bifold doors with a house that I'm renovating and it's missing some of the hardware. I'd like to replace the footings that are in the tracks as well as they appear to be damaged (if that's possible without replacing the track). Looking for some guidance on all th ... (cont.)

The pictures show a pin which you have to push up and slide into the double-u shaped plastic slide. The doors are over 25 years old. I can't find the parts in any store such as Home Depot, Lowes, Ace Hardware and an old hardware store. I havae called every bifold door place and can't find the par ... (cont.)

Hi, I have a bi-fold mirror door. There are top and bottom pivot pins attached, as well as a top guide pin. I found a loose/detached pin which appears to be the bottom guide pin. It's 4-1/4 inch long without any threads or cot pin hole. I need help finding the missing parts to put the pin back in pl ... (cont.)

I need a replacement pin that was misplaced somewhere throughout the ownership of this home. It is the guy pinned snaps in the track at the bottom and slides from a set of bi-folding doors from the late 70s.