Viewing all customer Discussions for:

S751-33 33" Series 751 Channel Balance

looking at your - 33" SERIES 751 CHANNEL BALANCE to replace single hung wood window. my actual length is 33 1/2" with the attached shoe on the end.(photo attached) - I belive that the shoe on mine is your number 15-197 - will also need matching cams-pivot bars as well belive your number is 26-150- ... (cont.)

I need this part but my old one that needs replaced it narrower than 9/16". It's about 1/2" wide. Do you have anything like that? Part #: S751-33 32HD Thank you!

Attached are photos of the Balancer. Dimensions: length 33", width 9/16", depth 5/8", ribbed. Stamped 32RT, B.S.I. 08 Shoe is 1 1/8" x 1" x 3/8"

I talked to someone earlier this morning but have had trouble getting the photo to this post but here it is I think. The picture is of the 34HD The windows were ordered in 1987 I need to replace following balances: (2) 34HD TS8 (2) 36HD TS8

I would like to replace the channel balance springs in two of my Weather Shield Visions 1000's. They are stamped 33DH CL or GL. The glass is tempered so the active window weighs 30 lbs. They are single hung tilt. I would like to get the whole assembly with the knife lock attached. Since I instal ... (cont.)

I am confident we can find a replacement balance, but we need some help. Could you reply back to us with the width, height, and length measurements of the balance? This information will help lead us in the right direction of which replacement to suggest.

I need to replace both channel balances in a Weathershield (I believe Proshield series) double hung tilt window. The window was installed in 2000. Photos attached. Channel marking is 32TG (BSI), see photos. Also see photo of locking mechanism at bottom of cable. Best I can determine the Weather ... (cont.)

I need (2) S751-33" balances stamped 32 REG and (2) S751-25" balances stamped 24HD but I need these to have the 15-197 shoe attached. Is this something that you can make quickly for me as a home closing depends upon this repair.

I will be ordering series 751 in both 32 TG and 32 HD for my Weather Shield double hung, wood, tilt Windows . I do not know the length of the balance but they are stamped with 32 TG and 32 HD.I also need knife point cam tilt pivot pins. I don't see an exact match on your web site so attached are ... (cont.)

I believe that I need a 33'' series 751 balance for a window - part number S751-33 the number on the old part is 32tg - my question is with the end piece on the balance I am attaching photos as the end piece on your site does not match what I haveAny help would be appreciated

The balance spring is marked 32R, BSI and a small PG. The overall length of the spring balance is 34 3/4 (thirty four and three quarters of an inch) or 882mm. It is fitted to a Weathershield Wood tilt sash. The window is 11 years old. The balance has a metal push down cord brake. I also need we ... (cont.)

Where can I buy a replacement for these? Each one has a different stamp. One is 30TG and the other is 32TG.

Since it is not possible to remove the jamb liners on a single hung window, what is the best way to replace a 751TG 34" balance?

Balance replacement S751-33 did not work.

I need replacement channel balances for Kolbe metal clad double hung wood windows. The marking on the channel is (#32)The window size is 2'w x 6'h . I can't take a photo of the channel removed because I don't know how to remove it. The window is cica 1990. Thanks, Thomas McClure

32XHD tse on ridged balance

I want to make sure that your 33" Series 751 Channel Balance is the correct product for our windows. We have Bonneville double hung tilt and wash sashes from 2004. Each sash weighs about 28 lbs, so I am thinking of the 32 HD (as indicated also on the stamp on the original balance. It looks like it ... (cont.)

Hello, I seem to have the correct size channel balance selected, but I require your assistance in selecting the correct spring. The numbers stamped on the channel balance are 26-3 FD5 CMC 87. Your assistance is greatly appreciated. Best regards, Ken

I need 1 ribbed channel balance but mine has a blue locking terminal. I don't see any pictured. Are they available? Vicki

I need to replace 24 balances. The balances are labeled with a number. The size listed on the balance is different than the actual length of the part. For example a size 16 measures 17". I think it is a 16" part but I need to be sure. Please clarify. I have the weights for each sash but I do ... (cont.)