Viewing all customer Discussions for:

S751-33 33" Series 751 Channel Balance

Hope you are well. I have a double hung vinyl window in need of upkeep. I removed the sashes and they each weigh 12.6lbs. I removed the balance and it is one piece of vinyl with an aluminum balance inside. The balance channel measures 33" (h) and 1" (w). This is after I removed the vinyl insert that ... (cont.)

Hello,I'm trying to see if you have any replacement channel balance for my old weathershield windows. The window model per their website is a 610/810 double hung tilt, part: 980825 for a 32HD balance. These windows are circa 2004, at least when my townhouse was built.I'm looking at your products and ... (cont.)

I am looking to replace the window block & tackle sash balanceI am enclosing some pictures, plus the label found on the frame.The length is 33 inches, the width is 1/2 ". it has seven wholes, theimprint says: 32 TG..The label in your photo is an NFRC (National Fenestration Rating> Council) ce ... (cont.)

Looking to order these balances, hopefully you can identify, these go with Weathershield Impact glass sashes Let me know the price and lead time if you can help identify.

Is a balance shoe available and can it be replaced or does the whole jam liner need to be replaced? Do you carry either the balance shoes or the jam liners?

I'm looking for a video to replace my tension bar I have a double tilt weather shield window

Can you help me look for this balance? It is 34 1/4" long

Attached are images from Caradco windows that require parts to repair. Pivet shoes that have the measurements on the images and I believe the primary measurement is the thickness at 3/8" for the broken pivet shoe. I also need cam pivet bars that attach to the bottom sashes of these windows and loo ... (cont.)

I have block and tackle balances stamped with "BSI" and 32HT on the top sash, and 32HB on the bottom sash. i can always get more pictures but this is all i have for now. can you help me figure out if these can be replaced with one of your products?

Please see photos of sash balance needed for a wood window with vinyl jamb liner. Not Andersen (at least no AW on the glass) Home is 2001.

# on side of window is 32TC.

My house was built in 1993 with Marvin double hung windows that tilt in by virtue of side panels that run top to bottom on each side and must be flattened in to tilt the window. The tilting panel is labelled 320HD. Do you sell the replacement channel balance for this

Good Day, I have several windows with bad windows balance channels. The Channel is 33" in length and has a stamp of FE32HLK 3.S.I. The Issue I have is that all of the plastic top and bottoms are broken and some missing. Are you able to assist? Many Thanks

Hello I'm happy to find this page, I'm looking for Windows balance, but I don't have from which company they are, what I have is the code number eg32xhlk, 33", I think I found it and your catalog but I want to make sure, I need your help thank you very much.

Looking for some Peachtree double hung tilt out Balance and shoes sold around 2007 - 2008

I have many windows not functioning because the balance and or shoe is broken or not functioning. Balance is marked 32D and measures 33". Can you confirm correct balance and shoe? Will need to order 6 pr (12 units) Will also need a couple of cam pivots. Appreciate the assistance. Any advice on insta ... (cont.)

Hi, I believe the attached window balancer is a 32XHD with a blue shoe. I couldn't locate a replacement, do you have any suggestions? Thanks again for the help!

I need to replace the balance tube on l and s sides of sash At that time, they used a string instead of the metal spiral.

One locking shoe broke off in my lower sash channel in a double-hung window (the other is functional, so the lower window only partially stays open). I am not sure of the window manufacturer but am eager to order a replacement part so as to not have my window contractor have to replace the whole th ... (cont.)

Need 4 balancers for each of these sizes? also would like to see if you sell just the lower locking mechanism that is on the bottom of the balancer pully.