Viewing all customer Discussions for:

33-072 #8 x 3/8" SS Pan Head Philips Screw

I identified a single hung needing a coil balance. I think the series is 1255/3500/3540hs it is a single coil.

I've 10 replacement vinyl windows I will list the sizes below they have the dual coil balance system their double pane insulated glass I will need the shoes for all of them as those of all broke because they were plastic I attached one that my neighbor got he doesn't remember the part number I want ... (cont.)

I ordered the 33-071 screw to install your 56-090 Screen wicket. The screws don't grab securely to the screen frame, and tend to come loose. Is there a recommended, better hardware option? Thanks!

Hello, I have a condo where the bathroom window crank lo longer connects properly to close the window. One of the residents ordered parts from your company in the past, but I'm not sure what's needed for my situation. Please see the attached photos. Can you please let me know what parts I need ... (cont.)

4" L x 1.250" W x .500" Thick. Please find photos of Assy and post bar. Do you have similar components? My pivot locks are completely eroded.

Hello, I am in need of some balancers parts for the UPPER sash of 2 windows. The dealer the we purchased the windows from about 20 years ago, said the type that I am needing is no longer available. They directed me to your website. I have attached a picture on the items that are needing replac ... (cont.)

Hi, I need few Window Coil Balance Replace parts (Dual Coil) and don't know the weight of the window. this is a standard window (I believe 30"x36") Image is attached here. Just wondering if you could help me pick the right part. Thanks, Mark

I received the jamb spreader tool and it works GREAT , very easy to take the hardware out of the jamb I have dimensions for what I need for the hardware for my windows I have also enclosed a picture of the items a. Pivot block measures 1 3/8l long from top to bottom and 1

Hi, I spoke with A representative yesterday at your store and I am not sure what type of part I need to fix my window. The make of the window is Patriot. I need a coil balance for it. The attached pictures should give you an indication of what type of coil balance I need. Can you please take a lo ... (cont.)

my questioin is the windows I am trying to repair have a stackable coil balance with the stamp on the esiting is 7Y will your series 140 quick tilt balance triple work for me

Hello, I need to replace window balances in a couple of windows. They're about 20 years old. The spring is just under 1/2" and stamped Caldwell 5#-35" EX. Do you sell these or have a replacement balance? Thanks, Ken

No Identifying marks other than US Patent #5,353,548 I have several rentals that have these windows that need the balances replaced. I would like to have a few of these overnighted to me, then have a source to get them from when needed

Windows no longer stay up, the coil balance springs no longer working. Trying to replace with equal parts if available. Not sure of window manufacture, do not see any labeling?? Do you know where I can get these parts?

Please see the attached. The shoe measures 9/16 ~ 5/8" x 1-7/16" As you can see, the knotches has two knotches. Looks like I would have to replace the springs and shoes. Any suggestions? Eric

I am looking for this type of sash balance for a customer. They are Traco Windows. They are spring loaded plastic

I have double hung tilt windows from Alside in the house I had built 9 years ago. Recently the top sash dropped in one set. After looking through your website for instructions, I was able to get to the pivot shoe and coil balance system, and found that the coil balance had pulled out of the shoe o ... (cont.)

I attempted to order a replacement coil balance for my window but it is a two-coil and what I ordered was a single coil. I have attached photos of the balance. I have included several pictures including one with the '9' shown on the coil. Window size is 34 1/4 x 33 5/8. Any recommendations? Ther ... (cont.)

I need to order coil balances. I know I need shoe #15-180, spring #S190-640 (2 for each shoe, I assume), clip #15-181, screw #33-072 (2 per shoe, right?). My question is, how do I know what else I need to make a complete balance? I have a sample in front of me, but it may not be complete. Do I n ... (cont.)

Thanks for posting! Before I can offer an applicable replacement for your hardware, can you tell me if there are any stamps or markings printed on your coil springs?

What us the best screw, or other hardware, to hold the 80-001 security bracket in place?