Viewing all customer Discussions for:

15-086 Tandem Coil Housing

I seem to have a broken balance on one side of my alliance sashlite window. The metal strip is messed up. One photo shows that strip and the other photo of other side appears ok

Looking to replace two sets of coil balances and one of the pieces that pull back to release the window to lean in.

I'm going to send pictures of windows with broken balancers. Could you tell me what I need?

These counter balances look different from what I can find online. Seems to unlock with a tab instead of a screw. Purchased house new, not sure window mfr. No stickers.

Are you able to identify this part? It is at my Dad's house, so if I need to go remove it I will. Just thought I would give it a try without taking it out. You guys have helped me before. Thank you so much! TerriAnn

My niece has a sash that does not stay up. The windows are about 5 years old. The coil spring appears to have 'escaped' from the 9lb Quick Tilt Balance. Unsure what "series" (i.e 140 series) is needed.

Hi, I am looking to match these coil balance/cam assembly. I will need (10) total or (5) pairs. The window manufacturer is unknown. They are vinyl double hung replacement windows approx. 5-10 years old. Dual stacked coils that are stamped 4 on each so I'm assuming 4lbs each. Please help me identify ... (cont.)

Is this an 8lb spring ??

I have a 30H x 48W double hung impact window that the balances on the lower sash have broken. The weight of the window is 48 pounds. The springs are mangled, and some are broken. The spring housing is brittle and broken as well. There are 3 coils on each side of the sash. I could not find any maki ... (cont.)

My 6 lb window left side balance spring housing is broke so I need a replacement. It's a double spring housing I need the upper part. I am sending pictures.

The white coil housing has "PAT 5353548" on it. A previous post stated that 15-086 matches that housing. I couldn't find any markings on the coils. So I was trying to see what pound the coil balance should be. My window no longer stays up and a lot of google searches led me to this website. My le ... (cont.)

Hello , I need these parts for back sash for American Craftsman 50 series please....2 sets to change both on back sash...Thanks You

Unfortunately I am unable to locate any stickers or markings on the window. I am not sure what brand they are.

I need a new set of balance coils for an older window. The picture is the only identification indicator on the unit.

M 6 lb. on boots Plastic clips just broke apart and pieces caused jamming issues and the boys just forced window up and down, breaking the shoes. I need 2 of each. There are no bars alongside, thinking the shoes are part S161-06 but don't take my word for it.

Please let me know if you have these parts available. Tank You. Rich

Hello could you please identify these parts..I would like to replace them on my windows..Regards..Freddie

Hi I need this pivot shoes cover which is cracked. It had two 4 lb constant force balances in it. If this is not available can I replace it with a single 8 lb pivot shoe. Thank you. Renzo

Traco window part needed to keep window from sliding down. Windows were installed in 2003. We think this is the part that needs replaced.

I am trying to figure out what balance coil I need. It has two springs/coils in each one. I don't know how to remove them. Do I need to notch the window frame as in a U tube video?Sorry there is no name on the window. Help!