Viewing all customer Discussions for:

15-086 Tandem Coil Housing

Hello Emily the expert , There are two picture. showing my problematic coil balance, with no names, numbers or markings on any of the parts, as I can see. Only a number "8". The window sash weighs 30 lbs. Please help to identify the part (spring) to be ordered, or other ways to solve the pro ... (cont.)

I am fairly certain these two parts are correct (based on patent 5,353,548) Coil Housing Pivot (plastic) 15-087 Tandem Coil Housing (plastic) 15-086 There was no number on the coil spring. Need help in finding the correct coil spring The spring is 1/2" wide with two round holes Dimensions of ... (cont.)

Looking for 4 replacement balances. Measurements are 1 1/4" x 9/16". Please let me know if you can help. Thank you!

Hello, my windows kept falling down because the coil balance is broken and I wanted to replace it. I am not sure which coil balance, guard, and shoe I need so I took pictures. Thank you in advance for your help.

Hi, Can you help me identify which parts I need to order. Both pivot bar snapped off in the pivot shoe and the broken piece of bar won't come out.

Hello ? I have identified replacement housings (15-086) by dimensions and appearance, and the coils by rating and dimensions (S180-6, S180-7) but cannot find a match for the pivot housing. Please see the attached photos. Will the 15-087 replace both the lower tandem housing and the pivot housing, or ... (cont.)

Hello I'm trying to replace a broken tandem coil spring balance. Overall it seems to be 3-7/8" long, by 1-3/16" wide. There also is a number on case: PAT 5,353,548 One of the coils is stamped with 5 KC, the other with 7 13W. The weight of the wash is 21.6 lbs.

Looking for parts for silverline window balance. Pics and subject have all info. Tandem constant force balance #6 with cam; and #7 for vinyl double hung window. Left side from inside. Top housing marked with a 7 and coil inside marked with 7DK (pretty sure housing 15-086). Bottom housing has blue c ... (cont.)

Can you help me identifying. Looks like ,double coil with the number printed on the spring 4z??

I need four each of these with the springs

The balance spring is bad and I need to replace. I am not sure the manufacturer of the window or how to remove the bad balance without prying it out which I have not done yet.

30 pound window. The part is about 1 1/8 inch wide 1/2 inch thick and about 5 3/4 inches long. 731V is on one metal roll 536v on the other roll. Patton 5,353,548. I hope this helps identify the part.Thanks,Don

4 bottom guides straight (LIC PAT 5,069,001) 1 Sash top cover 1 bottom 90° guide 6 Sash locks internal with springs

what are the part numbers needed to replace coil spring and complete housing both portions. Is it the same part number for left and right side of window?. On my windows the coil broke on both sides as well as housing.

Trying to identify correct replacement for my windows.

On the metal rolls is stamped 731v on one and 536v on the other. Size is about 1 1/8th inch wide, 9/16ths thick and 5 5/8ths long. It is a 30 pound tilt window made by CDI.

I have no name or part number only a 7 on the shoe the metal Spring snapped and came out looks to be more than one

Hello. so happy I found this site. I am trying to repair two Trayco windows from the early 90's. smaller window, 31x20, has one "mouse" with a spring labeled "7" I think I got that 15-087. The larger window has one Mouse, and two extra cartridges all with springs labeled "5". My question is how ... (cont.)

Please see attached photo for identification. Do you have this in stock? Do you have a store in Dallas who may sale this item? 13 lbs each side.Thanks William

Hi, have an old window and I need to replace what i think is called the balance (the coil & roller parts...sorry if this is not the correct name). I attached a two pics to hopefully help figure out what I need... I'm not sure if this is one piece that broke apart or its multiple pieces that I have t ... (cont.)