Viewing all customer Discussions for:

15-087 Coil Housing Pivot

Looking for assistance with three broken window pieces 1. The first (picture titled window 8) screwed into picture titled window 4. There were two that broke and the top part of the window came crashing down when opening. 2. The second piece (picture titled window 7) came from the bottle inside ... (cont.)

I have vinyl Soft-Lite double-hung tilt-in windows. Can you identify the part numbers for the 3 photos attached? The balance assembly is stamped with "Patent number 5,353,548".The silver bars measure 2 13/16 x 4/16If you sell the balance assembly, do you have an installation video or instructions?La ... (cont.)

Hi, Need both left and ride side coil-spring packs, and a pair of tilt-lock latches. Thank you, Guy Q.

My replacement double hung vinal windows broke the window coil balance. Besides the coil itself what parts do I need? There is a #8 on the side of the shoe (I think it is called).

Hi Can I know what is the part # please to order

I am looking for replacement coil springs for my window, they were made by gorell the windows weigh 14 lbs and are 35" wide by 21 1/4" tall. the channel the spring and slide runs in is 1 7/16" wide by 1/2" deep. I am not able to remove the slide without having to cut the channel and i am unable to f ... (cont.)

Help ID part for replacement of broken spring. Left Side. PAT 5.353.548 Double hung window. Also information on replacement of the spring.

I contacted Soft Lite windows who purchased the assets of Gorell but too much time has passed and they no longer have the parts for these windows. They thought this part was a balancer. Can you help?

I am not sure if you are the manufacturer, but is this compatible with your coils? What model is this? thank you

Pictures show the broken balance and on intact. I need to know how to remove them and get 2 replacements.

2 coil springs in each side. Need left and right side for one window. Double pane sash approximately 30 inches wide by 24 inches high. I did not measure, but that should be close if that helps with weight determination. There is no cutout in the spring channel - assuming I will have to cut that. I ... (cont.)

Hi, I need to replace the hardware in many windows in a school in southeastern PA (the windows are not staying up). I believe the school has an assortment of Traco TR9000 and TR95000 windows. I understand the pictures are poor however it's all I have to work with until I get out to the site. I u ... (cont.)

Dear sir or madam, I am not sure which type of coil balance, the window is from HomeDepot, Americancraft something. Please help, Thank youBestZhilin

Double hung window, lower sash springs broken, both sides, looking for 9 Lb. springs, pivot bar and pivot lock shoes. No cutouts, and no room at top or bottom, but I saw in a You tube video a guy cut his own cutouts. Lower sash opens 31 inches. Channel is about 1 1/4" x 1/2". It's not clear in the p ... (cont.)

I had Ideal double hung windows installed in July 2019 and last week the coil snapped. It is located on the bottom panel, on the right side. There are two numbers on the balance: the bottom has 6R and the top one has 6# (see photo). I haven't taken the balance out of the window so I can keep it shut ... (cont.)

Coil balancer for a 23" American Craftsman Window #4

I am coming up with your 6 lbs Series 161 Roller-Tilt, do you agree?

Hi-The part (metal coil) that keeps these windows open has failed and the windows do not stay up. Do you have replacement parts? Thank you.Rip.

Ellison window series 1500 shoe replacement, for left side and right side. Do you have this replacement part?

The upper spring weight is broken. Can you assist me in identifying the replacement.