Viewing all customer Discussions for:

39-152 Andersen Classic Operator Cover

I need the cover and handles of the hardware as it appears on that picture

I need your help to identify what replacement operator will be suitable for the awning window. I also need a new white crank and crank cover. And if you have a lubricating spray I would like to order that as well. Thanks in advance for your help!!

Due to adding remote blinds I need a flat window piece with handle. Debbie

Crank out 91/2 inches

Need cover

Windows installed probably 20 - 30 years ago. 2 windows per section x 3 sections with about 8" separation between each 2 window section along wall of upstairs room. Of the 6 cranks, only about 3 will push window out and up. The others either grind and sound stripped or if window is out must be pu ... (cont.)

My order number was 1759286,these were parts of Andersen - straight arm operator and Tandem stash Lock. These parts did not fit and I returned it back. I have uploaded the pictures of the parts that is currently on my Window and looking for the correct replacement parts. Please let me know the corr ... (cont.)

Hello I need help identifying parts that cover lock and open/close handle parts. Also need screen for this Anderson window. Second window need only casing for part with handle and for lock on right side, I don't know which brand this window is. Thank you

Hi, These are 2 cranks from 1997 casement windows, one left, one right, both appear to be stripped. Can you tell me the correct replacements? I have crank handle, I also need the covers. Rhank you, Richard

Window glass is stamped with Anderson. No markings on operator parts Arm seems to be 8 3/8 or so Looks different from typical Anderson straight arm operator replacements from what I can tell. The cover for the crank handle is only 3 3/4" to 4" wide. House was built in 1967 not sure if this was a rep ... (cont.)

I need to replace 2 of these cranks - can you provide compatable replacement parts and do I also need new handle and covers? I think Handles - yes but covers I am not sure if the current will fit new or not. Thank you, Jack

Wanting to order folding cranks and covers. What do you recommend?

We just bought this house. We were told the house was built in 2001. Something like 6 of the window cranks/operators are completely stripped. We are looking to replace the 6, or maybe all 12 of our windows' cranks/operator mechanisms. Here are the markings I see on one of the devices:AndersonCR CA C ... (cont.)

Looking for a replacement for window crank operator, Anderson window, installed 1999. On part has nubmer F 9400 8a

My andersen windows were installed in 2007 and I wish to replace the current handle with the folding kind. Is the Truth Folding Handle part # 39-376 a compatible replacement. Attached are photos of the current one with handle on and also handle and cover off. I am pretty handy and how difficult is i ... (cont.)

Number on hardware cw35-cw6 and below that cxw5-cxw6 23 " str can you help replace hardware and hinges thanks ?

The number on the top is C-9400A-1. On the bottom the number is F-9400-8A. There is a single bump on the bottom so I'm not sure if an adapter is needed or not. Thanks in advance for your helpGene

Operator is slipping hard to open Installed in 2002

Need part for opposite window ??right. Are there 2 seperate arms to be purchased? I'm seeing that I need operator,handle, cover. Any help in finding the right parts. Thank you.

I have two casement windows with no hardware covers. Are there replacements sold? I can see the following on the casement arm: 1361461 It appears that hardware in other rooms are Truth brand.