Viewing all customer Discussions for:

39-152 Andersen Classic Operator Cover

These numbers are on the arm 1361460 07/16/02/1 Also measurements of the arms are 3 1/2 and 4 1/4 Thanks!

Would this work as a replacement for an Andersen Classic Series Operator for casement windows? I need something that is low profile to work better with window blinds

hi - this window was damaged by a bear getting in. looks like i'll need that bent arm assembly, as well as the crank and cover for the latching mechanism. also some of the wood trim parts and the screen. thanks for your help!

I need the cover and the handle and white and in any other color y'all have

I am attaching two pictures below. Hoping for some help identifying the correct parts. Thank you in advance!

I need to replace this operator

i believe these are the original windows and the house was built in the early 80s near sacramento california. the interiors are wood and the exterior seems to be clad with vinyl. i will be so appreciative if you can help me find the handle and other parts! thanks.

I have older Anderson window, and am looking for your truth folding handle with cover for an older Anderson window ;the size I need which is approximately 3.5 inches wide . Do you have them? I am attaching a photo

Pics of the faulty part in question. On the top, there is a Part Number of F-9400-A by the center circle. On the bottom, there is a marking of 1361484 and 052402 on the second swing arm. I presume the 052402 is the manufacturer or inspection date since we purchased the Anderson encasement windows in ... (cont.)

The photo shows my existing operator has three screws aligned with the geared pivot point plus two more screws on a smaller centerline toward the external side of the window. All replacement operators I see have a different mounting screw arrangement with two unaligned mounting screws with smaller ... (cont.)

I want to say that 39-301 is the hand crank we need but what is the plate that is needed to cover it? Thank you!

can you please tell me if I can replace this window handle with a foldable crank window handle

Hello, I would like to replace the cranks to be out of the way for our window treatments. This style seems to work and I would like to know if it would be a proper replacement. Thanks

Please let me know if you have a replacement parts (Operator, Cover and Handle)

Is there a replacement for the gear portion of the casement hardware or would a current operator fit this Anderson window? arm 1361460 07/24/02/.2 arm 1361461 07/24

Hi there, I would like to replace both the cranking mechanism and bronze coverplate for an Anderson casement window. The unit was installed between 1995 to 2000. The marked ID no. is: C-9400-1. When standing on the outside of my house the window hinges on the left side. Do you sell such an item a ... (cont.)

need interior mechanism and other part of lock handle that snaps in..and front cover..one from depot don't fit

I'm looking for the proper Anderson window crank opener handle in white. I need 2 of them. Thank you.

Attached are pictures of our Andersen Awning window specifically the arm operator open and closed, the cover (which appears to be a different style and size on your website) and our specific cover. We are attempting to verify that the parts below are correct. We believe we need to order 39-099; ... (cont.)

Can you please tell which options i have to replace these in white? Many thanks, Mary Ann