Viewing all customer Discussions for:

39-152 Andersen Classic Operator Cover

Window glass is stamped with Anderson. No markings on operator parts Arm seems to be 8 3/8 or so Looks different from typical Anderson straight arm operator replacements from what I can tell. The cover for the crank handle is only 3 3/4" to 4" wide. House was built in 1967 not sure if this was a rep ... (cont.)

I need to replace 2 of these cranks - can you provide compatable replacement parts and do I also need new handle and covers? I think Handles - yes but covers I am not sure if the current will fit new or not. Thank you, Jack

Wanting to order folding cranks and covers. What do you recommend?

We just bought this house. We were told the house was built in 2001. Something like 6 of the window cranks/operators are completely stripped. We are looking to replace the 6, or maybe all 12 of our windows' cranks/operator mechanisms. Here are the markings I see on one of the devices:AndersonCR CA C ... (cont.)

Looking for a replacement for window crank operator, Anderson window, installed 1999. On part has nubmer F 9400 8a

My andersen windows were installed in 2007 and I wish to replace the current handle with the folding kind. Is the Truth Folding Handle part # 39-376 a compatible replacement. Attached are photos of the current one with handle on and also handle and cover off. I am pretty handy and how difficult is i ... (cont.)

Number on hardware cw35-cw6 and below that cxw5-cxw6 23 " str can you help replace hardware and hinges thanks ?

The number on the top is C-9400A-1. On the bottom the number is F-9400-8A. There is a single bump on the bottom so I'm not sure if an adapter is needed or not. Thanks in advance for your helpGene

Operator is slipping hard to open Installed in 2002

Need part for opposite window ??right. Are there 2 seperate arms to be purchased? I'm seeing that I need operator,handle, cover. Any help in finding the right parts. Thank you.

I have two casement windows with no hardware covers. Are there replacements sold? I can see the following on the casement arm: 1361461 It appears that hardware in other rooms are Truth brand.

Looking for 3 sets of casement window hardware. The window installer left without finishing the job,,

I have an Anderson Bow Window that was installed in late 1997. The two side windows are casement type crank windows. The window cranks are missing the cover and looks unfinished. Would the 39-152 be the correct cover? I'm not sure because the wood cutout in my window where the cover would go is a ... (cont.)

The window this is from is in another town so I do not have installed pics. F-9400-8A stamped on underside of main assembly There is a C on the extension arm and 1361484

This item seems to be what I need an the measurements r on target , what I dont see is a right or left hand controller ?? I need both r & l sides !! Can this item (39-264) serve both right & left sides ? I see nothing even on this 1 as to what side it replaces ?? Am I not seeing all the information ... (cont.)

13 inch arm, number stamped on arm top row = 1 361 485r. Second row= 1 361 482 hcr I need a left and a right. I ground off the rivets and opened the mechanism. Found teeth ground off bevel gear that handle attachesboth left and right window. The vise grips in the picture are holding it together ... (cont.)

My Bay window crank needs replaced; it is Anderson part C-9400-1. I called and you requested pictures to get the correct parts

Need 2 replacements cranks but not sure what type to order- please advise! Thank you!

Can you please tell me what the correct part number is for an Andersen casement window crank C-9400A-1 3. Photos attached. Thank you

I found the following on the arm "C2-C45- CW2-CW3"