Viewing all customer Discussions for:

39-152 Andersen Classic Operator Cover

I need the attached crank mechanism. Can you tell what I need from the pics? thanks

I am not looking for the shoe but I need to replace the metal rod that goes through the shoe as it is rusted.

In the first picture the threads are below the sill. Need an extension. In the other 2 we are removing the wooden sill and replacing with granite which will make it 3/4" thicker so need extensions for those 2 Windows. I measured these as 5/16, 12 teeth. Also need the hoods that are missing ... (cont.)

My parents are in the process of selling their home and need some replacement parts for their Andersen windows. I'm looking for the Andersen 400 Series Hardware Pack Part Stone - Awning & Casement Window but I need it for a window that was purchased between 1990-1995 Thank you!!!!!!!!! ... (cont.)

Ordered window cranks 39-114L : Crank Handle, 11/32", in early summer. Just found out from my tenant that they are too small a diameter for some of the windows. Is there a larger size?

Hello, I have Anderson wood casement windows throughout my home with about half that have cracked and broken what I would call "housing" on the inside of the window, and when we attempt to crank out, most will crank out, but will not close/ return. Can you help me identify the parts I need please? ... (cont.)

Pictures attached. I need the replacement part for the crank shaft. I assume I have to replace the entire unit, so here are some pictures to help identify. I need it in oil rubbed bronze.

does the adapter plate change the 4.5 inch dimension in the photo attached so that I can use the 39-264?

One window crank says Anderson. I do not know if it is original or a replacement

Original Part Numbers: 1) 1361486 L/1361483 HCR 2) 1361485 R/1361482 HCR (Picture Provided)

Do I need the adapter plate ( 39-264)?

I need a replacementc crank assembly for a 36"x36" Andersen window. Have numbers on the assembly but not sure if they are helpful.

Hello, I have 3 Anderson Window crank/Arms that need to be replaced. Two are right hand and the onther is left hand. The numbers on the arm are 1 361 485 R and 1 361 482 HCR. I measured the distance between the pivot points and come up with a measurement close to 14". Do you have a replacemen ... (cont.)

Generic window, needs knob as it seems to be striped. The window has a straight arm, and the roll out has a bent arm.

I need 2 crank window parts. The model # stamped on it is C-9400-1A. It is 9" from the screw at the end of to circular center hole. Do you have them by another model #.? They are about 15-20 years old and probably Anderson. Thank you.

Need crank mechanism and handle for one Anderson window, which is part of a bay window and is on the left hand side of the bay window as you look out from inside the house. I took two pictures of the unit need and one picture of the right hand side to show the brackets connection to the window itse ... (cont.)

We remodeled a condo, demolition and complete renovation, interior - built 1972-1975. Andersen casement windows in great shape but operator covers and lock covers were discarded in demo. I think they are the brownish tan color and have been painted over. Thanks! Last photo is from an ordinal win ... (cont.)

Can you find this window crank?

Looking for replacement part for Windows

please help me identify this part and let me know how to replace it. Thank you